CONSTRUCTION
The suspension upper support structure allows the vehicle body panel to be located between the rubber cushions.
The rear coil spring is offset mounted relative to the trailing arm to achieve the low vehicle floor, and the spring constant has been optimized to ensure excellent ride comfort. Also, the diameter of the spring ends has been reduced to ensure sufficient wheel stroke.
The low-pressure gas (N2) sealed rear shock absorber assembly delivers stable damping force characteristics, providing excellent maneuverability and ride comfort.
| *1 | Rear Coil Spring | *2 | Rear Shock Absorber Assembly |
| *3 | Suspension Upper Support | *4 | Low-pressure Gas (N2) |
To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.