Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2013.08–2016.04
NM30M0E _54 Brake _018312 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0090428 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  BRAKE CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Brake Actuator Assembly Skid Control ECU Judges the vehicle driving condition based on the signals from each sensor and switch, and sends the brake control signals to the brake actuator.
Solenoid Relay (Built into Skid Control ECU) Supplies power to the solenoid valves.
Motor Relay (Built into Skid Control ECU) Supplies power to the pump motor.
Solenoid Valves Change the fluid path based on the signals from the skid control ECU during the operation of the brake control system functions, in order to control the fluid pressure applied to the wheel cylinders.
Pump Motor Drives the pumps inside the brake actuator.
Speed Sensors Detect the wheel speed of each of the 4 wheels.
Stop Light Switch Assembly Detects the brake pedal depressing signal.
Parking Brake Switch Assembly Detects the parking brake lever status.
Brake Fluid Level Warning Switch Detects the brake fluid level.
Combination Meter Assembly Brake Warning Light
·

Lights up together with ABS warning light to alert the driver when the skid control ECU detects the malfunction not only in the ABS but also in the EBD.

·

Lights up to alert the driver when the brake fluid level is low.

·

Lights up to inform the driver when the parking brake lever is pulled up.


ABS Warning Light Lights up to alert the driver when the skid control ECU detects a malfunction in the ABS.


SYSTEM CONTROL


Control Outline
Anti-lock Brake System (ABS) The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface.
Electronic Brake Force Distribution (EBD) The EBD control utilizes ABS, realizing proper brake force distribution between the front and rear wheels in accordance with the driving conditions. In addition, during braking while cornering, it also controls the brake forces of the right and left wheels, helping maintain vehicle behavior.

a.

Anti-lock Brake System (ABS)

i.

The ABS helps prevent the wheels from locking during sudden braking or braking on a slippery surface. This provides the proper braking force when the vehicle slips, thus ensuring vehicle stability and excellent braking performance.

X102923
1.448,2.333 2.667,3.25 1.219,0.917 12 *B: 1.448,1.031 2.615,1.844 1.167,0.813 12 *A: 4.573,0.969 5.24,1.51 0.667,0.542 10 *a
*A Models with ABS *B Models without ABS
*a Brake Operation - -




b.

Electronic Brake Force Distribution (EBD)

i.

This function controls the brake force that acts on the rear wheels in accordance with the changes in the vehicle conditions such as load factors or deceleration, in order to ensure excellent braking performance.

X100697
1.948,1.719 1.781,1.719 1.781,1.719 1.781,2.563 true 4.917,1.406 4.74,1.406 4.74,1.406 4.74,2.375 true 2.406,2.635 2.229,2.635 2.229,2.635 2.063,2.49 true 5.417,2.604 5.24,2.604 5.24,2.604 5.073,2.458 true 0.594,2.135 1.344,2.542 0.75,0.406 10 Rear Brake Force 3.583,2.135 4.344,2.781 0.76,0.646 10 Rear Brake Force 1.99,1.635 3.125,2.031 1.135,0.396 10 Ideal Brake Force Distribution 4.958,1.323 6.104,1.708 1.146,0.385 10 Ideal Brake Force Distribution 2.438,2.542 3.229,2.854 0.792,0.313 10 EBD Control 5.448,2.531 6.24,2.844 0.792,0.313 10 EBD Control 1.729,2.917 2.885,3.24 1.156,0.323 10 Front Brake Force 4.74,2.917 5.896,3.24 1.156,0.323 10 Front Brake Force 1.667,3.281 3.01,3.625 1.344,0.344 10 Without Load in Rear 4.781,3.292 5.927,3.625 1.146,0.333 10 With Load in Rear


ii.

During cornering braking, this function controls the brake force that acts on the left and right wheels in accordance with the vehicle conditions at that time. This ensures vehicle stability and excellent braking performance.

X102924
2.958,1.292 3.271,1.49 0.313,0.198 10 false *a 3.5,0.188 3.813,0.385 0.313,0.198 10 false *b
*a Brake Force *b Control Moment





FAIL-SAFE


a.

In the event of a malfunction in the ABS, skid control ECU prohibits the brake control system.


b.

In the event of a malfunction in the EBD, the brake system is operated as long as possible even if the ABS is prohibited. If the EBD control becomes impossible, the brake warning light illuminates to inform the driver of that. In this case, the brake system is operated in the same condition as the brake system without the brake control system.



DIAGNOSIS


a.

If the skid control ECU detects a malfunction in the brake control system, then the ABS warning light, brake warning light illuminate either individually or as a group according to the function in which the malfunction has been detected, to alert the driver of the malfunction.


b.

At the same time, the DTCs (Diagnostic Trouble Codes) are stored in memory.


c.

This system has a sensor signal check (test mode) function.


d.

For details of the DTCs that are stored in skid control ECU memory and the DTCs that are output through the sensor signal check functions, see the Repair Manual.