CONSTRUCTION
Brake Assist Mechanism
The brake assist mechanism consists of the slide valve, slide valve hook, air valve, control valve and operation rod in the brake booster.
| *1 | Brake Booster Assembly | *2 | Air Valve |
| *3 | Slide Valve Hook | *4 | Slide Valve |
| *5 | Operation Rod | *6 | Control Valve |
OPERATION
Brake Assist Mechanism
With no braking condition, the air valve closes, the control valve opens, and the pressure is the same in the variable pressure chamber and the constant pressure chamber.
| *1 | Constant Pressure Chamber | *2 | Variable Pressure Chamber |
| *a | Control Valve "Open" | *b | Air Valve "Close" |
During normal braking, the control valve closes and the air valve opens to activate the brake booster function.
| *1 | Constant Pressure Chamber | *2 | Variable Pressure Chamber |
| *3 | Operation Rod | *4 | Power Piston |
| *a | Control Valve "Close" | *b | Air Valve "Open" |
|
Push |
|
Move |
When the operation rod speed is faster than the power piston speed, the air valve pushes the slide valve hook. Consequently, the slide valve separates from the slide valve hook, and the slide valve pushes the control valve to open the air valve wider than under normal braking. Thus, the air volume that is introduced increases. This results in a brake assist force to powerfully push the power piston.
| *1 | Constant Pressure Chamber | *2 | Variable Pressure Chamber |
| *3 | Operation Rod | *4 | Power Piston |
| *5 | Air Valve | *6 | Slide Valve Hook |
| *7 | Slide Valve | *8 | Control Valve |
| *a | Air Valve "Open" | *b | Air Valve "Wide Open" |
|
Push |
|
Move |
|
More Move | - | - |