Home › Brake › BRAKE (REAR) › REAR BRAKE
NM30M0E _54 Brake _018315 BRAKE (REAR) _0090431 REAR BRAKE DE DETAILS F

BRAKE (REAR)  REAR BRAKE  DETAILS  BRAKE CALIPER  


CONSTRUCTION


a.

Built-in Type Disc Brake

i.

The built-in type brake caliper assembly is comprised of a cylinder, piston assembly and actuator assembly, and has a built-in parking mechanism.

X112899
4.073,3.094 3.875,3.094 3.875,3.094 3.875,3.833 true 3.292,3.094 3.51,3.094 3.51,3.094 3.51,4.042 true 4.229,4.292 4.688,5.385 4.688,5.385 4.885,5.385 true 3.115,3 3.313,3.198 0.198,0.198 10 false *1 4.115,3.01 4.427,3.167 0.313,0.156 10 false *2 4.906,5.313 5.219,5.469 0.313,0.156 10 false *3 5.448,0.146 5.604,0.302 0.156,0.156 10 false A 3.354,5.302 3.667,5.458 0.313,0.156 10 false *a 5.438,2.604 5.594,2.76 0.156,0.156 10 false A
*1 Piston Assembly *2 Cylinder
*3 Actuator Assembly - -
*a A-A Cross Section - -





OPERATION


a.

Built-in Type Disc Brake

i.

When the parking brake lever is operated, the crank lever and the input shaft (actuator assembly) that is connected to the crank lever rotate via the parking brake cable.


ii.

At the same time, the input shaft slides the push rod through the movement of the check ball.


iii.

The nut sleeve in the piston that is connected to the push rod also slides, pushing out the piston and disc pad to generate braking force.

X112900
2.781,2.302 2.781,1.104 2.781,1.104 2.573,1.104 true 5.135,1.542 5.135,0.563 5.135,0.563 4.906,0.563 true 1.906,2.302 1.906,1.104 true 2.208,2.302 2.208,1.104 2.208,1.104 1.615,1.104 true 5.771,1.563 5.771,0.583 5.771,0.583 5.99,0.583 true 3.969,2.24 4.229,2.042 4.229,2.042 4.375,2.042 true 3.01,2.396 3.01,1.094 3.01,1.094 3.229,1.094 true 3.51,2.281 3.51,1.302 3.51,1.302 3.729,1.302 true 3.406,2.594 3.406,3.76 3.406,3.76 3.604,3.76 true 2.646,2.698 2.646,3.75 2.646,3.75 2.458,3.75 true 2.042,3.052 2.042,3.76 2.042,3.76 1.854,3.76 true 2.385,1.031 2.594,1.25 0.208,0.219 10 false *1 1.427,1.01 1.74,1.167 0.313,0.156 10 false *2 3.292,1.042 3.604,1.198 0.313,0.156 10 false *3 1.625,3.688 1.938,3.844 0.313,0.156 10 false *4 2.26,3.688 2.573,3.844 0.313,0.156 10 false *5 6.042,0.521 6.354,0.677 0.313,0.156 10 false *6 4.677,0.479 4.99,0.635 0.313,0.156 10 false *7 4.448,1.979 4.76,2.135 0.313,0.156 10 false *8 3.781,1.229 4.094,1.385 0.313,0.156 10 false *7 3.656,3.698 3.969,3.854 0.313,0.156 10 false *6
*1 Nut Sleeve *2 Disc Pad
*3 Push Rod *4 Disc Rotor
*5 Piston *6 Input Shaft
*7 Check Ball *8 Crank Lever



iv.

When the disc pad is worn and the clearance between the disc pad and disc rotor reaches a predetermined level, auto adjust operation is performed through hydraulic pressure when the brake pedal is operated.


v.

The piston slides until the disc pad makes contact with the disc rotor, and a clearance is created between the piston and nut sleeve. At this time, while rotating around the push rod, the nut sleeve moves until it makes contact with the piston and performs the adjust operation.

X100745
0.656,1.021 0.656,0.49 0.656,0.49 0.531,0.49 true 1.323,0.99 1.323,0.49 1.323,0.49 1.448,0.49 true 1.969,1.354 1.969,0.49 1.969,0.49 2.094,0.49 true 0.354,2.198 0.354,2.5 0.354,2.5 0.479,2.5 true 1.656,1.635 1.656,2.458 1.656,2.458 1.781,2.458 true 0.344,0.396 0.51,0.74 0.167,0.344 10 *1 1.5,0.406 1.677,0.75 0.177,0.344 10 *2 2.135,0.406 2.313,0.75 0.177,0.344 10 *3 0.5,2.406 0.677,2.75 0.177,0.344 10 *4 1.813,2.375 1.99,2.719 0.177,0.344 10 *5
*1 Disc Pad *2 Piston
*3 Push Rod *4 Disc Rotor
*5 Nut Sleeve - -



vi.

When the hydraulic pressure rises further, the nut sleeve does not rotate and the push rod pushes down the spring. Over adjustment is prevented by the push rod sliding together with the piston, and the correct clearance between the disc pad and disc rotor is maintained.

X100746
0.563,1 0.563,0.469 0.563,0.469 0.438,0.469 true 1.198,0.969 1.198,0.469 1.198,0.469 1.323,0.469 true 1.844,1.323 1.844,0.458 1.844,0.458 1.969,0.458 true 0.344,2.219 0.344,2.521 0.344,2.521 0.469,2.521 true 1.5,1.667 1.5,2.479 1.5,2.479 1.625,2.479 true 2.271,1.677 2.271,2.448 2.271,2.448 2.396,2.448 true 0.25,0.302 0.458,0.521 0.208,0.219 10 *1 1.375,0.313 1.604,0.521 0.229,0.208 10 *2 2.01,0.313 2.198,0.51 0.188,0.198 10 *3 0.51,2.448 0.729,2.656 0.219,0.208 10 *4 1.667,2.406 1.854,2.635 0.188,0.229 10 *5 2.438,2.385 2.646,2.615 0.208,0.229 10 *6
*1 Disc Pad *2 Piston
*3 Push Rod *4 Disc Rotor
*5 Nut Sleeve *6 Spring