OUTLINE
A vehicle speed sensing type Electric Power Steering (EPS) system is used.
This system generates assist torque using a power steering motor and a reduction mechanism that are mounted on the steering column assembly to assist the driver's steering.
A rack and pinion type steering gear assembly is used.
SPECIFICATION
| Item | Specification |
|---|---|
| Power Steering Type | Electric Power Steering |
| Steering Gear Type | Rack and pinion |
| Steering Gear Ratio (Overall) | 16.5 |
| No. of Turns Lock to Lock | 3.28 |
| Rack Stroke | 163.8 mm (6.45 in.) |
MAIN FEATURES
The EPS system has the following features:
The EPS system activates the power steering motor only when the driver turns the steering wheel. This reduces the energy consumption in a straight driving situation, resulting in excellent fuel economy.
The torque sensor, power steering motor and reduction mechanism are integrated into the steering column assembly, giving a simple and compact structure.
Unlike the conventional hydraulic power steering system, this system excels in serviceability because it does not require pipes, vane pump, pulley and power steering fluid.
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |