FUNCTION
Illuminated entry control function
When any one of the following conditions is satisfied, the illuminated entry system turns on the map light assembly and engine switch illumination*.
The map light assembly comes on when the map light switch is in the DOOR position.
Map Light Assembly
Any of the doors is opened.
With the ignition switch off, all doors closed and the driver door locked, the driver door is unlocked through a driver door key operation or transmitter operation.
With all doors closed, the ignition switch is turned from ON to off.
Engine Switch*
Any of the doors is opened.
With the engine switch off, all doors closed and the driver door locked, the driver door is unlocked through a driver door key operation or transmitter operation.
With all doors closed, the engine switch is turned from off to on (ACC or IG).
The headlight dimmer switch is turned to the tail position.
*: Models with smart entry and start system
When any one of the following conditions is satisfied, the illuminated entry system allows these lights to fade out in approximately 1 second.
Map Light Assembly
With the ignition switch off and any doors open, all doors are closed and then approximately 15 seconds have elapsed.
With all doors closed, the ignition switch is turned from ON to off and then approximately 15 seconds have elapsed.
With the ignition switch off and all doors closed, the driver door is locked.
With the ignition switch off, driver door locked and any doors open, all doors are closed.
With the ignition switch ON, all doors are closed.
With all doors closed, the ignition switch is turned to ON.
Engine Switch*
With the engine switch off and any doors open, all doors are closed and then approximately 15 seconds have elapsed.
With all doors closed, the engine switch is turned from on (IG) to off and then approximately 15 seconds have elapsed.
With all doors closed and any doors unlocked, the headlight dimmer switch is turned from the tail position to off, and then approximately 15 seconds have elapsed*.
With the engine switch off and all doors closed, the driver door is locked.
With the engine switch off, driver door locked and any doors open, all doors are closed.
With the engine idling, all doors are closed.
With all doors closed and the engine switch on (ACC or IG), the engine is started.
With all doors closed, the engine switch is turned from on (ACC) to off.
With all doors closed and locked, the headlight dimmer switch is turned from the tail position to off.
With all doors closed and any doors unlocked, the headlight dimmer switch is turned from the tail position to off, and then all doors are locked.
With all doors locked and any doors open, the headlight dimmer switch is turned from the tail position to off, and then all doors are closed.
*: Models with smart entry and start system
Battery Saving Function
A battery saving function is used to automatically turn the map light assembly and engine switch illumination*1 OFF when the following condition occurs continuously for over 20 minutes: the key is not in the ignition key cylinder*2 or the engine switch is off (Lock)*1 when any door is either ajar or open.
*1: Models with smart entry and start system
*2: Models without smart entry and start system