Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM › 2013.08–2014.03
NM30M0E _58 Vehicle Interior _018322 THEFT DETERRENT / KEYLESS ENTRY _0092837 SMART ENTRY AND START SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  SMART ENTRY AND START SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The smart entry and start system has the following main functions, making it a very user-friendly system.

Function Outline

*1: Models with automatic transaxle

*2: Models with manual transaxle

Start Function The start function is operated by simply pressing the engine switch while carrying the key. When the engine switch is pressed, the certification ECU (smart key ECU assembly) turns on/off the ACC relay, No. 1 ignition relay, No. 2 ignition relay, and starter relay to switch the power source pattern.
·

The power source pattern changes depending on depression of the brake pedal and the shift lever position.*1

·

The power source pattern changes depending on depression of the clutch pedal.*2


Start Function Engine Immobiliser The engine immobiliser function compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the key.
Steering Lock The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in steering lock actuator assembly.
Entry Function Entry Lock All doors are locked when the lock/unlock switch pressed while the user is carrying the key.
Entry Unlock All doors are unlocked when the lock/unlock switch pressed while the user is carrying the key.
Luggage Compartment Door Open The luggage compartment door opens when the luggage compartment door opening switch is pressed while the user is carrying the key.
Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors at a distance. The basic operation is the same as that in the wireless door lock control system.