Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM
NM30M0E _58 Vehicle Interior _018322 THEFT DETERRENT / KEYLESS ENTRY _0092838 ENGINE IMMOBILISER SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

For models with the smart entry and start system: The engine immobiliser system compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. The system unsets if these ID codes match. Thus, the certification ECU (smart key ECU assembly) and the ECM communicate with each other to authorize fuel injection and ignition, enabling the engine to start.

HINT:

When replacing the certification ECU (smart key ECU assembly) or making a new electrical key transmitter sub-assembly, key's recognition code(s) must be registered. For details, refer to the corresponding Service Bulletin for this model.



b.

For models without the smart entry and start system: The engine immobiliser system compares the ID code that is registered in the transponder key ECU assembly with the ID code of the transponder chip that is embedded in the ignition key. The system unsets if these ID codes match. Thus, the transponder key ECU assembly and ECM communicate with each other to authorize fuel injection and ignition, enabling the engine to start.

HINT:

When replacing the transponder key ECU assembly or making a new ignition key, the key's recognition code(s) must be registered. For details, refer to the corresponding Service Bulletin for this model.