Home › General › INTRODUCTION › FEATURES › 2014.03–2016.04
NM30M0E _V1 General _018274 INTRODUCTION _0090342 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

1NZ-FE Engine

i.

The 1NZ-FE engine is a 1.5-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.


ii.

This engine uses the Direct Ignition System (DIS), Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.

W111019

Item Specification
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Fuel System SFI
Displacement 1497 cm3 (91.3 cu. in.)
Max. Output [EEC] 80 kW @ 6000 rpm
Max. Torque [EEC] 141 N*m @ 4200 rpm



b.

2NZ-FE Engine

i.

The 2NZ-FE engine is a 1.3-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.


ii.

This engine uses the Direct Ignition System (DIS), Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.

V104646

Item Specification
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Fuel System SFI
Displacement 1299 cm3 (79.3 cu. in.)
Max. Output [EEC] 63 kW @ 6000 rpm
Max. Torque [EEC] 121 N*m @ 4400 rpm



c.

C50, C54 Manual Transaxles

i.

A C50 5-speed manual transaxle is used on the models with 1NZ-FE engine.


ii.

A C54 5-speed manual transaxle is used on the models with 2NZ-FE engine.

V101577

Item Specification
Transaxle Type C50 C54
Gear Ratio 1st 3.545 3.545
2nd 1.904 1.904
3rd 1.310 1.310
4th 0.969 1.031
5th 0.815 0.864
Reverse 3.250 3.250
Differential Gear Ratio 4.058 3.941



d.

U340E, U441E Automatic Transaxles

i.

A U340E 4-speed automatic transaxle is used on the models with 1NZ-FEengine.


ii.

A U441E 4-speed automatic transaxle is used on the models with 2NZ-FEengine.

V101580
1.865,3.365 2.083,3.563 0.219,0.198 10 false *1 5.438,3.365 5.656,3.563 0.219,0.198 10 false *2
*1 U340E Automatic Transaxle *2 U441E Automatic Transaxle


Item Specification
Transaxle Type U340E U441E
Gear Ratio 1st 2.847 2.875
2nd 1.552 1.568
3rd 1.000 1.000
4th 0.700 0.696
Reverse 2.343 2.300
Differential Gear Ratio* 4.237 4.375

HINT:

*: Counter gear ratio included.




e.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A torsion-beam type suspension is used for the rear.

V104543



f.

Steering

i.

An Electric Power Steering (EPS) system is used.


ii.

A manual tilt mechanism is used.

X112958



g.

Brake

Item Specification
Front Brake Type Ventilated Disc
Rotor Size (D x T)*1 255 mm x 22 mm (10.04 in. x 0.87 in.)*2
275 mm x 22 mm (10.83 in. x 0.87 in.)*3
Rear Brake (for Disc) Type Solid Disc
Rotor Size (D x T)*1 259 mm x 9 mm (10.20 in. x 0.35 in.)
Rear Brake (for Drum) Type Leading-trailing Drum
Drum Inner Diameter 200 mm (7.87 in.)
Brake Control System ABS with EBD*4

HINT:

*1: Diameter x Thickness

*2: Models with 14" disc wheel

*3: Models with 15" disc wheel

*4: Models with ABS with EBD