CONSTRUCTION
Anti-corrosion Sheet Steel
Anti-corrosion sheet steel is used as in the following illustration.
| *A | For Sedan Models | - | - |
|
Anti-corrosion Sheet Steel | - | - |
| *A | For Hatchback Models | - | - |
|
Anti-corrosion Sheet Steel | - | - |
Under Coat
Acrylic resin is applied to the under side of the body, inside the wheel housing and other parts that are susceptible to stone chipping damage, thus improving the rust-resistant performance of these areas.
| *A | For Sedan Models | *B | For Hatchback Models |
| *a | Front Wheel House LH | *b | Front Wheel House RH |
| *c | Rear Wheel House LH | *d | Rear Wheel House RH |
|
Edge Seal |
|
Acrylic Resin Coating Area |
|
Acrylic Resin Coating Area (Thick Coating) | - | - |
Wax and Anti-chipping Application
Wax is applied to the front end of the hood sub-assembly, each door hinge, edge of the door lower portion and fuel filler lid hinge to improve rust-resistant performance.
| *A | For Sedan Models | *B | For Hatchback Models |
| *1 | Door Panel | *2 | Front Side Member Outer |
| *3 | Fuel Filler Lid Hinge | *4 | Door Hinge |
| *a | A-A Cross Section | *b | PVC-chip Primer Coating Area |
|
Wax |
|
Anti-chipping Paint |