FUNCTION OF MAIN COMPONENTS
The main components of the exhaust emission control system are as follows:
| Component | Function |
|---|---|
|
*1: Models with air fuel ratio sensor *2: Models without air fuel ratio sensor |
|
| TWC | The TWCs reduce emissions by oxidation of CO and HC in exhaust gas and reduction of NOx. |
| Oxygen Sensor | Converts the oxygen concentration level in the exhaust gas into an electromotive force, thus detecting whether the air fuel ratio is richer or leaner than the stoichiometric ratio. |
| Air Fuel Ratio Sensor*1 | Is used to determine the concentration of oxygen remaining in the exhaust gas, and has a characteristic where its output is proportional to the air fuel ratio. |
| ECM | ·
Optimizes the air fuel ratio according to signals from the oxygen sensor.*2 ·
Controls the volume of fuel consumed based primarily on the signal from the air fuel ratio sensor, with minor corrections based on the signal from the oxygen sensor. This control optimizes the air fuel ratio.*1 |