CONSTRUCTION
The exhaust pipe is made of stainless steel in order to reduce the weight, improve the rust resistance and enhance the TWC warm-up capability.
2 TWCs are provided at the front of the front exhaust pipe assembly.
Ball joints are used to joint the exhaust manifold to the front exhaust pipe assembly, and the front exhaust pipe assembly to the tail exhaust pipe assembly. As a result, a simple construction and improved reliability have been realized.
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |