Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE SYSTEM › 2016.04–2016.10
NM30M0E _54 Brake _018313 BRAKE SYSTEM (OTHER) _0090429 BRAKE SYSTEM GE GENERAL F

BRAKE SYSTEM (OTHER)  BRAKE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A tandem type brake master cylinder sub-assembly is used.


b.

A single diaphragm type brake booster assembly is used.


c.

The brake assist mechanism integrated into the brake booster assembly is on models with ABS with EBD.


d.

The brake booster vacuum ejector control is used.*

HINT:

*: for Automatic Transaxle models or CVT models.




SPECIFICATION


*1: for Rear Drum Brake

*2: for Rear Disc Brake

Brake Master Cylinder Sub-assembly Type Tandem
Diameter mm (in.) 20.64 (0.813)*1
22.22 (0.875)*2
Brake Booster Assembly Type Single Diaphragm
Size in. 9.0


MAIN FEATURES


a.

The mechanical type brake assist uses the brake assist mechanism in the brake booster to mechanically activate the brake booster function in order to increase the brake force.


b.

The primary purpose of the brake assist is to provide an auxiliary brake force to assist a driver who cannot generate a large brake force during emergency braking, thus helping to ensure the vehicle's brake performance.

X105977E03
0.698,0.927 2.583,1.802 1.885,0.875 10 false The fluid pressure is increased by the brake booster 1.385,3.958 2.469,4.281 1.083,0.323 10 false Braking Force 4.823,3.948 6.594,4.271 1.771,0.323 10 false With Brake Assist 4.823,4.677 6.594,5 1.771,0.323 10 false Without Brake Assist 3.708,5.292 4.125,5.615 0.417,0.323 10 false Time