Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › 2016.04–2016.07
NM30M0E _58 Vehicle Interior _018278 HEATING / AIR CONDITIONING _0090351 AIR CONDITIONING SYSTEM GE GENERAL F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A manual air conditioning system or automatic air conditioning system is used.



SPECIFICATION


a.

Performance

Item Specification
Air Conditioning Type Manual Automatic
Heater Heater Output W 4400 4400*1
4500*2
Air Flow Volume m3/h 280 280
Power Consumption W 190 190
Cooler Cooling Capacity W 4120*1*3
4280*4
4500*2
4120*3
4280*4
Air Flow Volume m3/h 450 450
Power Consumption W 220 220

HINT:

*1: Except models for G.C.C. countries

*2: Models for G.C.C. countries

*3: Models with 1NZ-FE engine or 2NZ-FE engine

*4: Models with 1NR-FE engine or 2NR-FE engine



b.

Ventilation and Heater Radiator Unit Sub-assembly

Item Specification
Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II
Size (W x H x L) mm (in.) 232.7 x 130 x 21 (9.16 x 5.12 x 0.83)
Fin Pitch mm (in.) 1.8 (0.07)
Blower Motor with Fan Sub-assembly Motor Type K62-10
Fan Type Shroud Sirocco
Fan Size (Dia. x H) mm (in.) 110 x 74 (4.33 x 2.91)


c.

Air Conditioning

Item Specification
Cooler Condenser Assembly Type Multi-Flow (MF)-IV
Size (W x H x L) mm (in.) 640 x 319 x 16 (25.2 x 12.6 x 0.63)*1
520 x 319 x 16 (20.5 x 12.6 x 0.63)*2
Fin Pitch mm (in.) 3.15 (0.12)*1
2.75 (0.11)*2
No. 1 Cooler Evaporator Sub-assembly Type Revolutionary super-slim Structure (RS)*3
Beneficial Refrigerant Stream (BRS)*4
Size (W x H x L) mm (in.) 185.9 x 251 x 38 (7.32 x 9.88 x 1.50)
Fin Pitch mm (in.) 2.6 (0.10)*1
3.4 (0.13)*2
Cooler Compressor Assembly Type 10SE13C*3
10SRE11C*4
Pulley Magnetic Clutch
Refrigerant Type HFC 134a
Charge Volume g 370 +/- 50*5
400 +/- 50*6
Clean Air Filter Semi Standard Type

HINT:

*1: Models for G.C.C. countries

*2: Except models for G.C.C. countries

*3: Models with 1NZ-FE engine or 2NZ-FE engine

*4: Models with 1NR-FE engine or 2NR-FE engine

*5: Except models for G.C.C. countries of TMT made

*6: Models for G.C.C. countries of TMT made




MAIN FEATURES


a.

The air conditioning system has the following features:

High Performance
·

Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.*

·

The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.*


Lightweight A bus connector (air conditioning harness assembly) with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.*
Compact
·

A semi-center location air conditioning unit in which the cooler evaporator sub-assembly and heater radiator unit sub-assembly are placed in the vehicle's longitudinal direction is used.

·

A blower motor with a built-in blower motor controller is used in a compact construction.


Others The following parts are used to ensure high cooling performance while realizing a compact and lightweight construction.
·

Semi-center location air conditioning unit

·

Revolutionary super-slim Structure (RS) evaporator*2

·

Beneficial Refrigerant Stream (BRS) evaporator*3

·

Multi-Flow (MF)-IV sub-cool condenser assembly



HINT:

*1: Models with automatic air conditioning system

*2: Models with 1NZ-FE engine or 2NZ-FE engine

*3: Models with 1NR-FE engine or 2NR-FE engine