Home › Drivetrain › K411 CVT › CVT SYSTEM › from 2016.04
NM30M0E _52 Drivetrain _052312 K411 CVT _0252136 CVT SYSTEM DE DETAILS F

K411 CVT  CVT SYSTEM  DETAILS  SHIFT SOLENOID VALVE  


CONSTRUCTION


a.

The functions of each solenoid valve are outlined in the table below.

Solenoid Valve Type Function
Duty Solenoid Valve DS1 (for Shift Control) 3-way Acceleration control by increasing the fluid flow volume to the primary pulley
Duty Solenoid Valve DS2 (for Shift Control) 3-way Deceleration control by increasing the fluid flow volume from the primary pulley
Linear Solenoid Valve SLU (for Lock-up Control) Linear Lock-up clutch pressure control
Linear Solenoid Valve SLT (for Line Pressure Control) Linear
·

Line pressure control

·

Precise control in accordance with the variation of the pulley ratio using a linear solenoid valve


Linear Solenoid Valve SLS (for Belt Clamping Force Control) Linear Control of hydraulic pressure applied to the secondary pulley in order to control the belt clamping pressure necessary for transmitting torque