Home › Drivetrain › K411 CVT › SHIFT LOCK SYSTEM › from 2016.04
NM30M0E _52 Drivetrain _052312 K411 CVT _0252137 SHIFT LOCK SYSTEM GE GENERAL F

K411 CVT  SHIFT LOCK SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A shift lock system consisting of a shift lock control unit is used.


b.

In the shift lock system, the shift lock function and the key interlock function* are controlled by the shift lock control ECU.


c.

A cap is provided on the shift lock release button to prevent erroneous operation.

*: Models without Smart Entry and Start System




PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)