OUTLINE
An analog display type combination meter is used.
A multi-information display whose display items can be changed by pressing the ODO/TRIP DISP switch, along with the shift position indicator* and a clock are provided in the Liquid Crystal Display (LCD) on the center section of the combination meter assembly.
A meter ECU and buzzer are enclosed in the combination meter assembly. This meter ECU maintains communication with other ECUs through the CAN.
An Eco Driving Indicator Light*, that informs the driver of whether the acceleration is Eco-friendly or not, is used.
*: Models with automatic transaxle or CVT
| *A | Models with Automatic Transaxle or CVT | - | - |
| *1 | Speedometer | *2 | Tachometer |
| *3 | Fuel Gauge | *4 | Multi-information Display |
| *5 | Eco Driving Indicator Light | *6 | ODO/TRIP DISP Switch |
| *a | The illustrations shown are examples only. | - | - |
| *A | Models with Automatic Transaxle or CVT | - | - |
| *1 | Speedometer | *2 | Tachometer |
| *3 | Fuel Gauge | *4 | Multi-information Display |
| *5 | Eco Driving Indicator Light | *6 | ODO/TRIP DISP Switch |
| *a | The illustrations shown are examples only. | - | - |
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |