Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2016.04–2017.10
NM30M0E _54 Brake _018312 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0090428 BRAKE CONTROL SYSTEM GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Brake control (ABS with EBD) or brake control (ABS with EBD, Brake Assist, Traction Control (TRC), Vehicle Stability Control (VSC)) is provided depending on the model.


b.

Mechanical type brake assist is used on models with brake control (ABS with EBD). Electrical type brake assist is used on models with brake control (ABS with EBD, Brake Assist, TRC and VSC).


c.

Traction Control (TRC) and Vehicle Stability Control (VSC) with a VSC OFF switch is provided on models with brake control (ABS with EBD, Brake Assist, TRC and VSC).



PRECAUTION


a.

When a brake control system is activated, the brake pedal may shudder. This is a normal occurrence of the system in operation and should not be considered a malfunction.


b.

The TRC and VSC functions control brake hydraulic pressure and engine output to enhance vehicle stability. Therefore, operate the VSC OFF switch (stop the operation of the TRC and VSC functions) only when it is necessary.*

*: Models with brake control (ABS with EBD, Brake Assist, TRC and VSC)


c.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)