Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › from 2016.04
NM30M0E _54 Brake _018312 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0090428 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  BRAKE ASSIST  


SYSTEM CONTROL


a.

With brake assist, based on the signals from the master cylinder pressure sensor, the skid control ECU calculates the amount and speed with which the brake pedal is applied to determine if the driver is attempting emergency braking. If the skid control ECU determines that the driver is attempting emergency braking, the brake assist function activates the brake actuator assembly to increase the brake fluid pressure, which increases the brake force.

X100699E03
3.813,1.094 4.781,1.094 true 3.01,0.531 4.167,0.75 1.156,0.219 10 Skid Control ECU 0.729,1.042 3.281,1.396 2.552,0.354 10 Master Cylinder Pressure Sensor Signal 4.865,1 6.823,1.771 1.958,0.771 10 The fluid pressure is increased by the skid control ECU 0.583,1.917 2.5,2.333 1.917,0.417 10 The fluid pressure is increased by the brake actuator 4.802,4.854 5.938,5.208 1.135,0.354 10 With Brake Assist 4.813,5.552 6.135,5.906 1.323,0.354 10 Without Brake Assist 3.698,6.094 4.052,6.448 0.354,0.354 10 Time 1.396,4.865 2.302,5.219 0.906,0.354 10 Braking Force