Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › from 2016.04
NM30M0E _54 Brake _018312 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0090428 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  SPEED SENSOR  


CONSTRUCTION


a.

An active type speed sensor is used. This sensor contains a Hall IC.


b.

The magnet type sensor rotor, which consists of N and S poles that are arranged in a circle, is integrated with the hub bearing inner race.

X104596C02
3.479,0.854 3.25,0.854 3.25,0.854 2.792,1.167 true 5.969,1.25 5.74,1.25 5.74,1.25 5.448,1.844 true 3.5,5.052 3.302,5.052 3.302,5.052 2.99,4.51 true 5.969,4.906 5.74,4.906 5.74,4.906 5.448,4.365 true 3.542,0.781 3.792,0.99 0.25,0.208 10 false *2 6.01,1.167 6.26,1.375 0.25,0.208 10 false *3 3.531,4.99 3.781,5.198 0.25,0.208 10 false *5 6.021,4.833 6.271,5.042 0.25,0.208 10 false *3 0.688,0.469 1.063,0.771 0.375,0.302 10 false *1 0.698,3.094 1.073,3.396 0.375,0.302 10 false *4
*1 Front Axle *2 Front Speed Sensor
*3 Sensor Rotor *4 Rear Axle
*5 Rear Speed Sensor - -




OPERATION


a.

The active type speed sensor uses a Hall IC to detect magnetic field changes caused when the sensor rotor rotates, and the sensor outputs the detected information to the skid control ECU as digital pulses.


b.

To detect the vehicle speed, the frequency of the output pulses is used. Because the active type sensor outputs digital pulses, it can detect vehicle speeds even when the vehicle is nearly stationary.

X103879E04
2.76,0.958 3.229,1.646 0.469,0.688 10 Sensor IC 2.146,0.917 2.698,1.281 0.552,0.365 10 Hall IC 2.146,1.323 2.698,1.688 0.552,0.365 10 Hall IC 0.885,1.792 2.135,2.24 1.25,0.448 10 Sensor Rotor (Bearing Inner Race) 3.979,0.74 4.448,1.406 0.469,0.667 10 Vehicle Speed 3.958,1.677 4.417,2.281 0.458,0.604 10 Sensor Output