CONSTRUCTION
The brake booster vacuum ejector increases the negative pressure applied to the brake booster assembly using the venturi effect.
The vacuum check valve maintains the negative pressure applied to the brake booster assembly.
The VSV opens and closes in accordance with signals from the ECM, and controls the amount of outside air introduced into the brake booster vacuum ejector.
OPERATION
for 1NZ-FE Engine or 2NZ-FE Engine
When the engine in started, negative pressure from the intake manifold travels to the brake booster assembly via pipe A.
If either of the electronic throttle control system-intelligent (ECTS-i) or variable valve timing-intelligent (VVT-i) has malfunctioned, and then the negative pressure inside the intake manifold decreases, the ECM opens the VSV, introducing outside air into the brake booster vacuum ejector. The flow speed of this outside air generates a high level of negative pressure. This negative pressure travels to the brake booster via pipe B.
When the VSV is open, the amount of air intake increases owing to bypass air traveling through the brake booster vacuum ejector. Because of this, the ECM corrects the opening amount of the throttle valve, and controls fluctuations in engine speed in accordance with the opening and closing of the VSV.
| *1 | Vacuum Check Valve | *2 | Brake Booster Assembly |
| *3 | Pipe A | *4 | Brake Booster Vacuum Ejector |
| *5 | Pipe B | *6 | VSV |
| *7 | Engine | *8 | Intake Manifold |
| *9 | Throttle Control Motor | *10 | Air Cleaner |
| *a | Venturi effect | *b | Venturi |
for 1NR-FE Engine or 2NR-FE Engine
When the engine in started, negative pressure from the intake manifold travels to the brake booster assembly via pipe A.
When negative pressure in the intake manifold is low, the ECM opens the VSV, introducing outside air into the brake booster vacuum ejector. The flow speed of this outside air generates a high level of negative pressure. This negative pressure travels to the brake booster via pipe B.
When the VSV is open, the amount of air intake increases owing to bypass air traveling through the brake booster vacuum ejector. Because of this, the ECM corrects the opening amount of the throttle valve, and controls fluctuations in engine speed in accordance with the opening and closing of the VSV.
| *1 | Vacuum Check Valve | *2 | Brake Booster Assembly |
| *3 | Pipe A | *4 | Brake Booster Vacuum Ejector |
| *5 | Pipe B | *6 | VSV |
| *7 | Engine | *8 | Intake Manifold |
| *9 | Throttle Control Motor | *10 | Air Cleaner |
| *a | Venturi effect | *b | Venturi |