Home › Engine / Hybrid System › 2NR-FE ENGINE CONTROL › SFI SYSTEM › from 2016.04
NM30M0E _51 Engine / Hybrid System _052894 2NR-FE ENGINE CONTROL _0256063 SFI SYSTEM CO CONTROL F

2NR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


FUNCTION


a.

The dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 46° (intake) and 40° (exhaust) respectively (of crankshaft angle) to provide valve timing that is optimally suited to engine operating conditions. This improves torque in all speed ranges as well as increasing fuel economy and reducing exhaust emissions.

W129401E01
1.333,1.333 1.5,1.333 1.5,1.333 1.635,2.115 true 1.333,2.583 1.5,2.583 1.5,2.583 2.156,2.438 true 1.583,4.167 1.75,4.167 1.75,4.167 1.833,4.563 true 3.583,1.167 3.75,1.167 3.75,1.167 3.885,1.969 true 4.583,1.333 4.417,1.333 4.417,1.333 4.323,2.094 true 4.417,3.5 4.25,3.5 4.25,3.5 4.167,3.042 true 0.167,1.229 1.26,1.76 1.094,0.531 10 false Intake Camshaft Timing Oil Control Valve Assembly 0.125,2.49 1.281,3.146 1.156,0.656 10 false Exhaust Camshaft Timing Oil Control Valve Assembly 2.281,1.052 3.531,1.635 1.25,0.583 10 false Intake Cam Position Sensor (No. 1 Crank Position Sensor) 4.625,1.24 6,1.917 1.375,0.677 10 false Exhaust Cam Position Sensor (No. 1 Crank Position Sensor) 5.938,2.896 6.396,3.094 0.458,0.198 10 false ECM 4.49,3.406 5.313,4.104 0.823,0.698 10 false E.F.I. Engine Coolant Temperature Sensor 5.896,3.646 6.917,4.198 1.021,0.552 10 false Intake Mass Air Flow Meter Sub-assembly 5.625,4.833 6.698,5.25 1.073,0.417 10 false Throttle Position Sensor 0.135,4.063 1.719,4.292 1.583,0.229 10 false Crank Position Sensor

W113352E01
2.729,0.677 3.01,0.677 3.01,0.677 3.427,1.167 true 4.24,3.406 4.5,3.823 4.5,3.823 4.74,3.823 true 1.271,0.583 2.813,0.927 1.542,0.344 10 false VVT-i Operation Range 3.563,0.521 3.938,0.771 0.375,0.25 10 false TDC 3.76,0.802 3.99,1.031 0.229,0.229 10 false 7° 3.948,0.844 4.25,1.125 0.302,0.281 10 false 10° 4.708,1.271 5.281,1.51 0.573,0.24 10 false 47° 4.729,3.271 5.042,3.531 0.313,0.26 10 false 48° 4.823,3.708 6.365,4.052 1.542,0.344 10 false VVT-i Operation Range 3.865,3.708 4.177,3.896 0.313,0.188 10 false 8° 3.583,3.979 3.958,4.229 0.375,0.25 10 false BDC 3.01,3.635 3.323,3.896 0.313,0.26 10 false 23° 2.156,2.76 2.521,3.125 0.365,0.365 10 false 69° 0.667,4.052 2.208,4.396 1.542,0.344 10 false : IN Opening Angle 0.656,4.365 2.198,4.708 1.542,0.344 10 false : EX Opening Angle 2.677,1.052 2.938,1.313 0.26,0.26 10 false 36°


b.

The dual VVT-i system delivers excellent benefit in vehicle states as shown in the table below.

i.

During Idle

W109609E01
3.417,0.083 3.75,0.333 0.333,0.25 10 TDC 2.833,0.833 3.167,1.083 0.333,0.25 10 EX 3.406,1.542 3.74,1.76 0.333,0.219 10 BDC 4.125,0.833 4.458,1.083 0.333,0.25 10 IN 3.875,0.302 4.958,0.552 1.083,0.25 10 Most Retarded

Objective Effect
Eliminating overlap to reduce blowback to the intake side.
·

Stabilized idle speed

·

Better fuel economy




ii.

At Light Load

W109000E02
3,0.031 4.25,0.365 1.25,0.333 10 To Retarded Side 2.833,0.833 3.167,1.083 0.333,0.25 10 EX 4.146,0.833 4.479,1.083 0.333,0.25 10 IN

Objective Effect
Eliminating overlap to reduce blowback to the intake side. Ensures engine stability


iii.

At Medium Load

W109001E02
2.469,0.052 3.719,0.302 1.25,0.25 10 To Advanced Side 2.833,0.833 3.167,1.083 0.333,0.25 10 EX 4.135,0.833 4.469,1.083 0.333,0.25 10 IN

Objective Effect
Increasing overlap to increase internal EGR to reduce pumping losses.
·

Better fuel economy

·

Improved emission control




iv.

In Low to Medium Speed Range with Heavy Load

W109002E02
3.49,1.479 4.823,1.729 1.333,0.25 10 To Advanced Side 4.146,0.75 4.396,1 0.25,0.25 10 IN 2.833,0.75 3.167,1 0.333,0.25 10 EX

Objective Effect
Advancing the intake valve close timing for volumetric efficiency improvement. Improved torque in low to medium speed range


v.

In High Speed Range with Heavy Load

W109003E02
2.833,0.833 3.167,1.083 0.333,0.25 10 EX 4.135,0.833 4.469,1.083 0.333,0.25 10 IN 2.646,1.531 3.833,1.75 1.188,0.219 10 To Retarded Side

Objective Effect
Retarding the intake valve close timing for volumetric efficiency improvement Improved output


vi.

At Low Temperatures

W109004E02
2.813,0.76 3.146,1.01 0.333,0.25 10 EX 4.167,0.76 4.417,1.01 0.25,0.25 10 IN

Objective Effect
Eliminating overlap to reduce blowback to the intake side stabilizes the idle speed during fast idle.
·

Stabilized idling engine speed

·

Better fuel economy




vii.

Upon Starting the Engine / Upon Stopping the Engine

W109005E02
3.625,0.115 4.708,0.365 1.083,0.25 10 Most Retarded 4.146,0.76 4.396,1.01 0.25,0.25 10 IN 2.833,0.76 3.167,1.01 0.333,0.25 10 EX

Objective Effect
Eliminating overlap to minimize blowback to the intake side. Improved startability