Home › Engine / Hybrid System › 2NR-FE ENGINE CONTROL › SFI SYSTEM › 2016.04–2017.10
NM30M0E _51 Engine / Hybrid System _052894 2NR-FE ENGINE CONTROL _0256063 SFI SYSTEM CO CONTROL F

2NR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  FUEL PUMP CONTROL  


FUNCTION


a.

Fuel Cut Control (Models with Airbag System)

i.

The fuel pump control is used to stop the fuel pump when the airbags deploy in a frontal collision.


ii.

In this system, the airbag deployment signal from the airbag ECU assembly is detected by the ECM, which turns off the circuit opening relay (C/OPN relay).


iii.

After the fuel cut control has been activated, turning the ignition switch from off to ON cancels the fuel cut control, and the engine can be restarted.

W129417E01
0.167,1.188 1.906,1.427 1.74,0.24 10 false From Airbag Sensors 1.958,0.958 2.708,1.375 0.75,0.417 10 false Airbag ECU Assembly 3.115,1.375 3.625,1.729 0.51,0.354 10 false CAN (V Bus) 3.74,0.958 4.198,1.156 0.458,0.198 10 false ECM 5.698,1.583 6.833,1.781 1.135,0.198 10 false Fuel Pump Motor 5.729,0.552 7.104,1.104 1.375,0.552 10 false Circuit Opening Relay (C/OPN Relay)