CONSTRUCTION
The pistons are made of aluminum alloy to allow them to be compact and lightweight.
The piston head portion uses a taper squish shape to achieve fuel combustion efficiency.
The piston skirt is coated with resin to reduce friction losses.
Semi floating type piston pins are used.
Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.
A steel No. 2 compression ring is used to improve wear resistance.
The oil ring is a 3-piece type, and use of the oil ring contributes higher reliability and lower friction.
A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring and oil ring, in order to improve wear resistance.
| *1 | No. 1 Compression Ring | *2 | No. 2 Compression Ring |
| *3 | Oil Ring | - | - |
| *a | Taper Squish Shape | *b | PVD Coating |
|
Resin Coating | - | - |