CONSTRUCTION
The connecting rod sub-assemblies are made of high-strength steel for weight reduction.
Plastic region tightening bolts (connecting rod bolts) are used to achieve a light weight.
The lining surface of the connecting rod bearing is micro-grooved to secure the optimal oil retainment performance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.
| *1 | Plastic Region Tightening Bolt (Connecting Rod Bolt) | *2 | Connecting Rod Sub-assembly |
| *3 | Connecting Rod Bearing | - | - |
| *a | Micro-grooved | - | - |