CONSTRUCTION
The crankshaft has 5 main journals and 8 balance weights.
The pins and journals have been machined with increased precision and the surface roughness has been minimized to reduce friction.
The structure of the oil passages has been redesigned so as to prevent foreign objects from entering the oil passages.
| *1 | Journal | *2 | Pin |
| *3 | Balance Weight | - | - |
| *a | Transparent view of passages from point A | *b | Redesigned Structure |
| *c | Conventional Structure | - | - |
|
Oil Passage | - | - |
The width of the crankshaft bearings has been optimized to reduce friction.
The upper main bearing (crankshaft bearing) has an oil groove around its inside circumference.
The lining surface of the crankshaft bearing is micro-grooved to secure the optimal oil retainment performance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.
| *1 | Upper Main Bearing (Crankshaft Bearing) | *2 | Lower Main Bearing (Crankshaft Bearing) |
| *a | Oil Groove | *b | Micro-grooved |