CONSTRUCTION
A timing chain (chain sub-assembly) with an 8 mm (0.315 in.) pitch is used to make the engine more compact.
The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times.
The No. 1 chain tensioner assembly suppresses noise generated by the timing chain (chain sub-assembly).
The No. 1 chain tensioner assembly is a ratchet type tensioner with a non-return mechanism.
An aluminum die-cast timing chain cover assembly is used.
The timing chain cover assembly has an integrated construction including parts of the cooling system (water pump and water passage) and the lubrication system (oil pump and oil passage). Thus, the number of parts has been reduced for weight reduction.
| *1 | Timing Chain Cover Assembly | *2 | Engine Water Pump Assembly |
| *3 | Oil Pump Cover | *4 | Timing Chain Tension Arm |
| *5 | No. 1 Chain Tensioner Assembly | *6 | Timing Chain (Chain Sub-assembly) |
| *7 | No. 2 Chain Vibration Damper | *8 | Timing Chain Guide |
| *a | Back of Timing Chain Cover Assembly | - | - |