Home › Engine / Hybrid System › 1NR-FE ENGINE CONTROL › SFI SYSTEM › from 2016.04
NM30M0E _51 Engine / Hybrid System _052929 1NR-FE ENGINE CONTROL _0256314 SFI SYSTEM CO CONTROL F

1NR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  COOLING FAN CONTROL  


FUNCTION


a.

According to the cooling fan drive request signal (low or high) from the air conditioning amplifier assembly and the engine coolant temperature, the ECM regulates the cooling fan speed over 2 levels. A cooling fan drive request signal is determined by the air conditioning amplifier assembly depending on mainly the refrigerant pressure and the A/C switch status.


b.

The low speed operation is accomplished by applying the current through a resistor, which reduces the speed of the cooling fan.

W127826E03
0.323,0.875 1.667,1.5 1.344,0.625 10 false E.F.I. Engine Coolant Temperature Sensor 0.333,2.448 1.917,3.083 1.583,0.635 10 false Air Conditioning Amplifier Assembly* 2.25,2.854 3.167,3.188 0.917,0.333 10 false CAN (V Bus) 3.521,1.844 3.917,2.177 0.396,0.333 10 false ECM 5.417,1.01 6.667,1.313 1.25,0.302 10 false Cooling Fan Relay 5.417,1.667 6.615,1.948 1.198,0.281 10 false Cooling Fan Motor 5.417,2.271 7,2.625 1.583,0.354 10 false No. 2 Cooling Fan Relay 5.417,3.052 6.74,3.365 1.323,0.313 10 false Cooling Fan Resistor 0.281,3.302 2.74,3.552 2.458,0.25 10 false *: Models with Air Conditioning System

Cooling Fan Operation
Engine Coolant Temperature Cooling Fan Drive Request Signal Cooling Fan Operation
Low Off Off
Low Low
High High
High Off High
Low High
High High