Home › Engine / Hybrid System › 1NR-FE ENGINE MECHANICAL › ENGINE UNIT › from 2016.04
NM30M0E _51 Engine / Hybrid System _052930 1NR-FE ENGINE MECHANICAL _0256334 ENGINE UNIT DE DETAILS F

1NR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-i CONTROLLER  


CONSTRUCTION


a.

Each VVT-i controller (camshaft timing gear assembly or camshaft timing exhaust gear assembly) consists of a housing driven from the timing chain and a vane coupled with the intake or exhaust camshaft.


b.

Both the intake and exhaust sides have a 4-blade vane.


c.

The oil pressure sent from the advanced or retarded side path at the intake and exhaust camshafts causes rotation in a VVT-i controller vane circumferential direction to vary the intake and exhaust valve timing continuously.


d.

When the engine is stopped, a lock pin locks the intake camshaft at its most retarded position and the exhaust camshaft at its most advanced position, to ensure that the engine starts properly.


e.

An advance assist spring is provided on the exhaust VVT-i controller (camshaft timing exhaust gear assembly). This spring applies torque in the advance direction when the engine is stopped, thus ensuring the engagement of the lock pin.

Intake VVT-i Controller (Camshaft Timing Gear Assembly)
W101990C05
3.76,1.427 4,0.667 4,0.667 4.083,0.667 true 3.813,1.969 3.573,2.875 3.573,2.875 3.5,2.875 true 3.167,1.49 3.333,0.771 3.333,0.771 3.406,0.771 true 5.448,1.271 5.646,0.542 5.646,0.542 5.719,0.542 true 3.448,0.698 3.635,0.875 0.188,0.177 10 false *1 4.146,0.573 4.333,0.75 0.188,0.177 10 false *2 5.792,0.438 5.979,0.615 0.188,0.177 10 false *3 3.323,2.813 3.51,2.99 0.188,0.177 10 false *4 5.25,3.219 5.469,3.406 0.219,0.188 10 false *b 6,3.229 6.208,3.427 0.208,0.198 10 false *c 4.854,2.49 5.042,2.667 0.188,0.177 10 false *a
*1 Housing *2 Vane (Fixed on Intake Camshaft)
*3 Intake Camshaft (Camshaft) *4 Lock Pin
*a Lock Pin Operation *b Engine Stopped
*c Engine Operating - -
V100135

Oil Pressure - -


Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly)
W100988C04
2.531,2.323 2.74,2.958 2.74,2.958 2.833,2.958 true 4.083,2.135 4.302,2.76 4.302,2.76 4.385,2.76 true 5.656,1.292 5.823,0.479 5.823,0.479 5.917,0.479 true 4.646,1.323 4.813,0.51 4.813,0.51 4.906,0.51 true 4.01,1.51 4.177,0.698 4.177,0.698 4.271,0.698 true 3.375,1.573 3.542,0.76 3.542,0.76 3.635,0.76 true 5.958,0.417 6.177,0.667 0.219,0.25 10 false *4 4.948,0.448 5.146,0.688 0.198,0.24 10 false *3 4.313,0.635 4.531,0.854 0.219,0.219 10 false *2 3.677,0.698 3.906,0.917 0.229,0.219 10 false *1 4.417,2.688 4.646,2.906 0.229,0.219 10 false *6 2.875,2.885 3.094,3.094 0.219,0.208 10 false *5
*1 Housing *2 Lock Pin
*3 Sprocket *4 Exhaust Camshaft (No. 2 Camshaft)
*5 Advance Assist Spring *6 Vane (Fixed on Exhaust Camshaft)




OPERATION


a.

Advance

i.

When the camshaft timing oil control valve assembly is operated as illustrated below by the advance signal from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction.

Intake Side
W113347C02
1.719,1.156 1.938,0.74 1.938,0.74 2.135,0.74 true 1.25,2.156 0.938,2.677 0.938,2.677 0.698,2.677 true 4.719,3.01 5.063,3.01 false 2.167,0.656 2.479,0.813 0.313,0.156 10 false *1 0.51,2.583 0.823,2.74 0.313,0.156 10 false *a 4.5,2.927 4.813,3.083 0.313,0.156 10 false *c 4.99,3.177 5.302,3.333 0.313,0.156 10 false *d 5.25,3.188 5.563,3.344 0.313,0.156 10 false *e 5.719,1.906 6.031,2.063 0.313,0.156 10 false *b
*1 Vane - -
*a Rotation Direction *b From ECM
*c Oil Pressure *d In
*e Drain - -


Exhaust Side
W113348C02
1.938,0.885 2.135,0.469 2.135,0.469 2.354,0.469 true 1.51,2.052 1.302,2.76 1.302,2.76 1.073,2.76 true 4.458,2.688 4.813,2.688 false 2.417,0.385 2.729,0.542 0.313,0.156 10 false *1 0.854,2.688 1.167,2.844 0.313,0.156 10 false *a 4.229,2.604 4.542,2.76 0.313,0.156 10 false *c 4.719,2.938 5.031,3.094 0.313,0.156 10 false *d 5.01,2.927 5.323,3.083 0.313,0.156 10 false *e 5.74,1.615 6.052,1.771 0.313,0.156 10 false *b
*1 Vane - -
*a Rotation Direction *b From ECM
*c Oil Pressure *d Drain
*e In - -




b.

Retard

i.

When the camshaft timing oil control valve assembly is operated as illustrated below by the retard signal from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction.

Intake Side
W113349C02
1.438,1.229 1.521,0.646 1.521,0.646 1.729,0.646 true 1.719,2.417 1.479,3.063 1.479,3.063 1.26,3.063 true 4.49,2.917 4.823,2.917 false 1.792,0.563 2.104,0.719 0.313,0.156 10 false *1 1.104,3 1.417,3.156 0.313,0.156 10 false *a 4.281,2.844 4.594,3 0.313,0.156 10 false *c 4.75,3.156 5.063,3.313 0.313,0.156 10 false *d 5.021,3.156 5.333,3.313 0.313,0.156 10 false *e 5.729,1.865 6.042,2.021 0.313,0.156 10 false *b
*1 Vane - -
*a Rotation Direction *b From ECM
*c Oil Pressure *d Drain
*e In - -


Exhaust Side
W113350C02
1.135,0.656 1.344,0.656 1.344,0.656 1.5,1.01 true 2.417,2.813 2.188,2.813 2.188,2.813 1.99,2.188 true 4.771,2.771 5.052,2.771 false 0.948,0.573 1.26,0.729 0.313,0.156 10 false *1 2.49,2.74 2.802,2.896 0.313,0.156 10 false *a 4.583,2.677 4.896,2.833 0.313,0.156 10 false *c 4.99,2.958 5.302,3.115 0.313,0.156 10 false *d 5.271,2.948 5.583,3.104 0.313,0.156 10 false *e 5.75,1.646 6.063,1.802 0.313,0.156 10 false *b
*1 Vane - -
*a Rotation Direction *b From ECM
*c Oil Pressure *d In
*e Drain - -




c.

Hold

i.

After reaching the target timing, the valve timing is held by keeping the camshaft timing oil control valve assembly in the neutral position unless the traveling state changes. This adjusts the valve timing at the desired target position and prevents the engine oil from running out when it is unnecessary.