Home › Engine / Hybrid System › 1NR-FE INTAKE / EXHAUST › EXHAUST SYSTEM › from 2016.04
NM30M0E _51 Engine / Hybrid System _053519 1NR-FE INTAKE / EXHAUST _0259769 EXHAUST SYSTEM DE DETAILS F

1NR-FE INTAKE / EXHAUST  EXHAUST SYSTEM  DETAILS  EXHAUST MANIFOLD  


CONSTRUCTION


a.

Stainless steel exhaust manifold converter sub-assembly with integrated ceramic type Three-Way Catalytic converter (TWC) is used for warming up the TWC, reducing weight and resisting rust.


b.

The exhaust manifold converter sub-assembly has been reduced in length and the port shape has been optimized to shorten the period of time required to warm up the catalyst.


c.

The cooling holes have been provided on the heat insulator to cool down the exhaust manifold surface temperature, improving the durability.

W113972C01
1.333,1.125 1.573,1.125 1.573,1.125 1.875,1.396 true 1.344,1.396 1.604,1.396 1.604,1.396 1.948,1.667 true 1.271,2.156 1.51,2.156 1.51,2.156 1.813,2.427 true 1.292,2.583 1.552,2.583 1.552,2.583 1.896,2.854 true 3.323,0.375 3.49,0.375 3.49,0.375 3.688,0.865 true 5.719,1.615 5.479,1.615 5.479,1.615 5.177,1.135 true 1.083,1.052 1.396,1.208 0.313,0.156 10 false *1 1.073,2.083 1.385,2.24 0.313,0.156 10 false *2 5.792,1.531 6.104,1.688 0.313,0.156 10 false *3 3.094,0.302 3.406,0.458 0.313,0.156 10 false *4 1.083,1.323 1.396,1.479 0.313,0.156 10 false *a 1.073,2.49 1.385,2.646 0.313,0.156 10 false *a
*1 No. 1 Exhaust Manifold Heat Insulator *2 No. 2 Exhaust Manifold Heat Insulator
*3 Exhaust Manifold To Head Gasket *4 Exhaust Manifold Converter Sub-assembly
*a Cooling Hole - -