OUTLINE
Exhaust Emission Control System
Three-Way Catalytic converters (TWCs) is used in the exhaust manifold converter sub-assembly.*1
2 Three-Way Catalytic converters (TWCs) are used in the exhaust manifold converter sub-assembly and the front exhaust pipe assembly.*2
The ECM performs the air fuel ratio feedback control based on signals from the air fuel ratio sensor and the oxygen sensor, and controls the fuel injection amount so that the air fuel ratio comes close to the stoichiometric air fuel ratio at which the highest purifying efficiency of CO, HC and NOx is obtained.
An air fuel ratio sensor and an oxygen sensor heater control, which maintain the temperature of the respective sensors at an appropriate level, are used to improve the detection accuracy of oxygen concentration in exhaust gas.
*1: Models compliant with EURO 2 emission regulations
*2: Except models compliant with EURO 2 emission regulations
Blowby Gas Ventilation System
A blowby gas ventilation system, which efficiently ventilates blowby gas containing HC from the crankcase, is used.
Evaporative Emission Control System
An evaporative emission control, which regulates the purge flow of evaporative emission (HC) into the charcoal canister in accordance with the engine conditions, is used.