CONSTRUCTION
The exhaust pipe is made of stainless steel to reduce their weight and improve rust resistance.
TWC is provided at the front of the front exhaust pipe assembly.*
*: Except models compliant with EURO 2 emission regulations
The ball joint is used to join the exhaust manifold converter sub-assembly to the front exhaust pipe assembly. As a result, a simple construction and improved reliability have been realized.
| *A | Except Models Compliant with EURO 2 Emission Regulations | - | - |
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |
| *A | Except Models Compliant with EURO 2 Emission Regulations | - | - |
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |