Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › 2016.10–2017.10
NM30M0E _53 Suspension _018309 FRONT SUSPENSION _0090425 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

In the front shock absorber assembly, a low-pressure (N2) gas sealed type construction is used to suppress cavitations and a multi-leaf type liner control valve is also used to attain the linear damping force characteristics, offering both driving stability and riding comfort.

X132156C03
2.667,3.75 2.833,3.75 2.833,3.75 3.365,3.323 false 2.75,1.75 2.917,1.75 2.917,1.75 3.406,2.229 true 2.458,3.646 2.771,3.802 0.313,0.156 10 false *1 2.542,1.646 2.854,1.802 0.313,0.156 10 false *2 0.25,5.448 0.563,5.646 0.313,0.198 10 false *a
*1 Front Shock Absorber Assembly *2 Low-pressure Gas (N2)
*a The illustrations shown are examples only - -


NOTICE:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.



b.

The multi-leaf type linear control valve has a structure consisting of several layered leaf valves with different diameter. Through use of the multi-leaf type linear control valve, changes in the damping force are made constant at low piston speeds, thus offering the excellent riding comfort and controllability.

X100023E05
4.729,0.542 6.021,0.854 1.292,0.313 10 Steady State Piston 4.771,0.854 6.01,1.26 1.24,0.406 10 High Flow Piston 2.135,0.344 2.885,0.656 0.75,0.313 10 Low Speed 2.958,0.333 4.635,0.677 1.677,0.344 10 Medium and High Speed 0.99,1.781 1.958,2.438 0.969,0.656 10 Extension Side Damping Force 0.813,2.646 1.948,3.302 1.135,0.656 10 Compression Side Damping Force 4.646,2.417 5.51,2.813 0.865,0.396 10 Piston Speed 2.552,3.135 4.531,3.531 1.979,0.396 10 Damping Force Characteristics