OUTLINE
1NR-FE Engine
The 1NR-FE engine is a 1.3-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.
This engine uses the Direct Ignition System (DIS), dual Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.
| Item | Specification |
| No. of Cyls. and Arrangement | 4-cylinder, In-line |
| Valve Mechanism | 16-valve DOHC, Chain Drive (with Dual VVT-i) |
| Fuel System | SFI |
| Displacement | 1329 cm3 (81.1 cu. in.) |
| Max. Output [EEC] | 73 kW @ 6000 rpm |
| Max. Torque [EEC] | 123 N*m @ 4200 rpm |
2NR-FE Engine
The 2NR-FE engine is a 1.5-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.
This engine uses the Direct Ignition System (DIS), dual Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.
| Item | Specification |
| No. of Cyls. and Arrangement | 4-cylinder, In-line |
| Valve Mechanism | 16-valve DOHC, Chain Drive (with Dual VVT-i) |
| Fuel System | SFI |
| Displacement | 1496 cm3 (91.3 cu. in.) |
| Max. Output [EEC] | 79 kW @ 6000 rpm |
| Max. Torque [EEC] | 140 N*m @ 4200 rpm |
C50, C54 Manual Transaxles
A C50 5-speed manual transaxle is used on the models with 2NR-FE engine.
A C54 5-speed manual transaxle is used on the models with 1NR-FE engine.
| Item | Specification | ||
| Transaxle Type | C50 | C54 | |
| Gear Ratio | 1st | 3.545 | 3.545 |
| 2nd | 1.904 | 1.904 | |
| 3rd | 1.310 | 1.310 | |
| 4th | 0.969 | 1.031 | |
| 5th | 0.815 | 0.864 | |
| Reverse | 3.250 | 3.250 | |
| Differential Gear Ratio | 4.058 | 3.941 | |
K411 and K312 Continuously Variable Transaxles (CVT)
A K411 Continuously Variable Transaxle (CVT) is used with the 1NR-FE engine.
A K312 Continuously Variable Transaxle (CVT) is used with the 2NR-FE engine.
The K411 and K312 CVTs, including the pair of pulleys and the steel belt in the shift mechanism, are transaxles which steplessly shift from start-up to the maximum speed offering a smooth shift feeling and excellent fuel economy.
| Item | Specification | ||
| Transaxle Type | K411 | K312 | |
| Pulley Ratio | Forward | 2.386 to 0.426 | 2.480 to 0.396 |
| Reverse | 2.505 to 1.736 | 2.604 to 1.680 | |
| Differential Gear Ratio* | 5.403 | 4.761 | |
*: Reduction gear ratio included.
Suspension
A MacPherson strut type independent suspension is used for the front.
A torsion-beam type suspension is used for the rear.
Steering
An Electric Power Steering (EPS) system is used.
A manual tilt mechanism is used.
Brake
| Item | Specification | |
| Front Brake | Type | Ventilated Disc |
| Rotor Size (D x T)*1 | 255 mm x 22 mm (10.04 in. x 0.87 in.)*2 | |
| 275 mm x 22 mm (10.83 in. x 0.87 in.)*3 | ||
| Rear Brake (for Disc) | Type | Solid Disc |
| Rotor Size (D x T)*1 | 259 mm x 9 mm (10.20 in. x 0.35 in.) | |
| Rear Brake (for Drum) | Type | Leading-trailing Drum |
| Drum Inner Diameter | 200 mm (7.87 in.) | |
| Brake Control System | ·
ABS with EBD ·
ABS with EBD, Brake Assist, TRC and VSC |
|
*1: Diameter x Thickness
*2: Models with 14" disc wheel
*3: Models with 15" disc wheel