OUTLINE
A tandem type brake master cylinder sub-assembly is used.
A single diaphragm type brake booster assembly is used.
The brake assist mechanism integrated into the brake booster assembly is on models with ABS with EBD.
The brake booster vacuum ejector control is used on models with CVT.
SPECIFICATION
|
*1: for Rear Drum Brake *2: for Rear Disc Brake |
|||
| Brake Master Cylinder Sub-assembly | Type | Tandem | |
| Diameter | mm (in.) | 20.64 (0.813)*1
22.22 (0.875)*2 |
|
| Brake Booster Assembly | Type | Single Diaphragm | |
| Size | in. | 9.0 | |
MAIN FEATURES
The mechanical type brake assist uses the brake assist mechanism in the brake booster to mechanically activate the brake booster function in order to increase the brake force.
The primary purpose of the brake assist is to provide an auxiliary brake force to assist a driver who cannot generate a large brake force during emergency braking, thus helping to ensure the vehicle's brake performance.