CONSTRUCTION
The exhaust pipe is made of stainless steel to reduce their weight and improve rust resistance performance.
Except models compliant with EURO 2 emission regulations, TWC is provided at the front of the front exhaust pipe assembly.
On TMMIN made models, a ball joint is used to join the front exhaust pipe assembly to the exhaust manifold converter sub-assembly. As a result, a simple construction and high reliability have been provided.
On TMT made models, 2 ball joints are used to join the front exhaust pipe assembly to the exhaust manifold converter sub-assembly and the tail exhaust pipe assembly to the front exhaust pipe assembly. As a result, a simple construction and high reliability have been provided.
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |
| *A | Except Models Compliant with EURO 2 Emission Regulations | - | - |
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |
| *A | Except Models Compliant with EURO 2 Emission Regulations | - | - |
| *1 | Gasket | *2 | TWC |
| *3 | Front Exhaust Pipe Assembly | *4 | Tail Exhaust Pipe Assembly |
| *a | Ball Joint Portion | - | - |