Home › Engine / Hybrid System › 1NR-FE ENGINE CONTROL › SFI SYSTEM › from 2017.10
NM30M0E _51 Engine / Hybrid System _052929 1NR-FE ENGINE CONTROL _0256314 SFI SYSTEM CO CONTROL F

1NR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  FUEL PUMP CONTROL  


FUNCTION


a.

Fuel Cut Control

i.

The fuel pump control is used to stop the fuel pump when the airbags deploy in a collision.


ii.

In this system, the airbag deployment signal from the airbag ECU assembly is detected by the ECM, which turns off the circuit opening relay (C/OPN relay).


iii.

After the fuel cut control has been activated, turning the ignition switch from off to ON cancels the fuel cut control, and the engine can be restarted.

W136695E01
0.219,1.188 1.708,1.385 1.49,0.198 10 false From Airbag Sensors 2.063,1 2.865,1.396 0.802,0.396 10 false Airbag ECU Assembly 3.813,1.01 4.615,1.271 0.802,0.26 10 false ECM 0.563,2.385 2.552,2.625 1.99,0.24 10 false : CAN Communication Line 5.719,1.625 6.896,1.865 1.177,0.24 10 false Fuel Pump Motor 5.719,0.542 7.125,1.063 1.406,0.521 10 false Circuit Opening Relay (C/OPN Relay)