FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Brake Actuator Assembly | Skid Control ECU | Judges the vehicle driving condition based on the signals from each sensor and switch, and sends the brake control signals to the brake actuator. |
| Solenoid Relay (Built into Skid Control ECU) | Supplies power to the solenoid valves. | |
| Motor Relay (Built into Skid Control ECU) | Supplies power to the pump motor. | |
| Solenoid Valves | Change the fluid path based on the signals from the skid control ECU during the operation of the brake control system functions, in order to control the fluid pressure applied to the wheel cylinders. | |
| Pump Motor | Drives the pumps inside the brake actuator. | |
| Speed Sensors | Detect the wheel speed of each of the 4 wheels. | |
| Stop Light Switch Assembly | Detects the brake pedal depressing signal. | |
| Parking Brake Switch Assembly | Detects the parking brake lever status. | |
| Brake Master Cylinder Sub-assembly | Brake Fluid Level Warning Switch | Detects the brake fluid level. |
| Combination Meter Assembly | ABS Warning Light | Lights up to alert the driver when the skid control ECU detects a malfunction in the ABS. |
| Parking Brake Warning Light | Lights up to inform the driver when the parking brake lever is pulled up. | |
| Brake Warning Light | ·
Lights up together with ABS warning light to alert the driver when the skid control ECU detects the malfunction not only in the ABS but also in the EBD. ·
Lights up to alert the driver when the brake fluid level is low. |
|
| Component | Function | |
|---|---|---|
|
*1: Models with Hill-start Assist Control *2: Models with monochrome type multi-information display *3: for TMT made *4: Models with color type multi-information display *5: for TMMIN made |
||
| Brake Actuator Assembly | Skid Control ECU | Judges the vehicle driving condition based on the signals from each sensor and switch, and sends the brake control signals to the brake actuator. |
| Solenoid Relay (Built into Skid Control ECU) | Supplies power to the solenoid valves. | |
| Motor Relay (Built into Skid Control ECU) | Supplies power to the pump motor. | |
| Solenoid Valves | ·
The hydraulic circuit has 2 master cylinder cut solenoid valves, 4 pressure holding solenoid valves and 4 pressure reduction solenoid valves. ·
Change the fluid path based on the signals from the skid control ECU during the operation of the brake control system functions, in order to control the fluid pressure applied to the wheel cylinders. |
|
| Pump Motor | Drives the pumps inside the brake actuator. | |
| Master Cylinder Pressure Sensor | Assembled in the brake actuator, detects the master cylinder pressure. | |
| Spiral Cable with Sensor Sub-assembly | Steering Angle Sensor | Detects the steering direction and angle of the steering wheel. |
| Airbag ECU Assembly | Yawrate Sensor | ·
The airbag ECU assembly incorporates the yawrate sensor and acceleration sensor. ·
The yawrate sensor detects the vehicle's yaw rate. ·
The acceleration sensor detects the vehicle's longitudinal and lateral deceleration. ·
The airbag ECU assembly sends the detection signals from the yawrate sensor and acceleration sensor to the skid control ECU via CAN communication. |
| Acceleration Sensor | ||
| Speed Sensors | Detect the wheel speed of each of the 4 wheels. | |
| Stop Light Switch Assembly | Detects the brake pedal depressing signal. | |
| Parking Brake Switch Assembly | Detects when the parking brake lever is pulled up. | |
| Brake Master Cylinder Sub-assembly | Brake Fluid Level Warning Switch | Detects the brake fluid level. |
| VSC OFF Switch | Enables the driver to select the Normal Mode, TRC OFF Mode or VSC OFF Mode. | |
| ECM | ·
Sends the throttle position signal, accelerator pedal position signal and engine speed signal to the skid control ECU. ·
Based on the signals received from the skid control ECU controls the engine output. |
|
| Combination Meter Assembly | ABS Warning Light | Illuminates to alert the driver when the skid control ECU detects a malfunction in the ABS. |
| Slip Indicator Light | ·
Illuminates to alert the driver if the TRC, VSC or Hill-start Assist Control*1 system malfunctions. ·
Blinks to inform the driver when the TRC or VSC operates. |
|
| TRC OFF Indicator Light*2 | Lights up to inform the driver of TRC OFF mode or VSC OFF mode being selected. | |
| VSC OFF Indicator Light | Lights up to inform the driver of VSC OFF mode being selected. | |
| Parking Brake Warning Light*3 | Illuminates to inform the driver when the parking brake is operated. | |
| Multi-information Display*4 | ·
Displays the warning message to inform the driver of a malfunction in the system. ·
Displays the information message when TRC OFF mode is selected. |
|
| Brake Warning Light | ·
Illuminates to alert the driver when the skid control ECU detects a malfunction in the EBD or brake system. ·
Illuminates to alert the driver when the brake fluid level is low. ·
Illuminates to inform the driver when the parking brake is operated.*5 |
|
SYSTEM CONTROL
Table of System Control
The brake control system has the following system/functions:
| Control | Outline |
|---|---|
|
*1: Models with brake control (ABS with EBD, Brake Assist, TRC and VSC) *2: Models with Hill-start Assist Control |
|
| Anti-lock Brake System (ABS) | The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface. |
| Electronic Brake Force Distribution (EBD) | The EBD control utilizes ABS, realizing proper brake force distribution between the front and rear wheels in accordance with the driving conditions. In addition, during braking while cornering, it also controls the brake forces of the right and left wheels, helping maintain vehicle behavior. |
| Electrical Type Brake Assist*1 | The primary purpose of Brake Assist is to provide supplementary brake force to assist a driver who cannot generate a large brake force during emergency braking, thus helping enhance the vehicle's braking performance. |
| Traction Control (TRC)*1 | Helps restrain the slippage of the drive wheels if the driver depresses the accelerator pedal excessively when starting off or accelerating on a slippery surface. |
| Vehicle Stability Control (VSC)*1 | Helps restrain sideways slippage of the vehicle during a strong understeer tendency or strong oversteer tendency while cornering. |
| Hill-start Assist Control*2 | When starting uphill, this control maintains the brake hydraulic pressure on all 4 wheels, in order to momentarily prevent the vehicle from descending backward. |
| Engine Output Control during TRC or VSC Operation*1 | Transmits an engine output control signal from the skid control ECU to the ECM to limit the engine output while the TRC or VSC is being activated. |
FAIL-SAFE
If a malfunction occurs in the skid control ECU, sensors, or brake actuator assembly, the system continues performing brake control by excluding the failed area and using only the areas that are operating normally.
DIAGNOSIS
If the skid control ECU detects a malfunction in the brake control system, the warning lights or indicator light illuminate. At the same time, a Diagnostic Trouble Code (DTC) is stored in the memory of the skid control ECU.
This system has a sensor signal check (test mode) function.
For details of DTCs and check function, refer to the Repair Manual.