Home › Drivetrain › C50 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE SYSTEM › from 2017.10
NM30M0E _52 Drivetrain _018305 C50 MANUAL TRANSMISSION / TRANSAXLE _0090421 MANUAL TRANSAXLE SYSTEM DE DETAILS F

C50 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  DETAILS  SHIFT CONTROL  


CONSTRUCTION


a.

Shift and Select Mechanism

i.

An excellent shift feel has been achieved through the use of the bearing, the No. 2 lock ball assembly and the shift lever damper on the shift and select lever shaft assembly.


ii.

A shift guide plate (No. 2 shift lever inner) is provided on the shift and select lever shaft assembly. The movement distance of the shift and select lever shaft assembly in the select direction after completing the shifting is regulated by the shift guide plate (No. 2 shift lever inner) and shift guide pin (shift gate pin). This clarifies the position of the shift knob and enables accurate shift operations.

X137880C03
2.24,1.844 2,1.5 2,1.5 1.833,1.5 true 3.167,1.333 3,1.333 3,1.333 2.583,1.708 true 5.167,5.083 5,5.083 5,5.083 4.74,4.333 true 5.469,3.073 5.302,3.073 5.302,3.073 5.167,3.396 true 3.885,3.167 3.719,3.167 3.719,3.167 3.51,3.854 true 3.365,3.917 3.198,3.531 3.198,3.531 3.031,3.531 true 2.656,4.167 2.406,3.729 2.406,3.729 2.24,3.729 true 4.5,3.083 4.333,3.083 4.333,3.083 3.979,3.49 true 1.646,1.396 1.958,1.552 0.313,0.156 10 false *1 3.24,1.26 3.552,1.417 0.313,0.156 10 false *2 5.542,3 5.854,3.156 0.313,0.156 10 false *3 2.052,3.635 2.365,3.792 0.313,0.156 10 false *4 5.25,5 5.563,5.156 0.313,0.156 10 false *5 5.635,1.115 5.948,1.271 0.313,0.156 10 false *a 5.406,1.781 5.719,1.938 0.313,0.156 10 false *b 2.375,2.49 2.688,2.646 0.313,0.156 10 false *c 4.177,2.531 4.49,2.688 0.313,0.156 10 false *d 3.948,3.083 4.26,3.24 0.313,0.156 10 false *2 2.854,3.438 3.167,3.594 0.313,0.156 10 false *1 4.573,3.01 4.885,3.167 0.313,0.156 10 false *6
*1 Shift Guide Plate (No. 2 Shift Lever Inner) *2 Shift Guide Pin (Shift Gate Pin)
*3 Shift Lever Damper *4 Shift and Select Lever Shaft Assembly
*5 Bearing *6 No. 2 Lock Ball Assembly
*a Select Direction *b Shift Direction
*c Neutral Position *d Shift Completed