FUNCTION OF MAIN COMPONENTS
The main components in the power door lock control system have the following functions:
| Component | Outline | |
|---|---|---|
|
*1: for hatchback *2: Models without smart entry and start system *3: Models with collision door lock release function *4: Models with smart entry and start system |
||
| Door Courtesy Light Switch Assembly | Detects whether the doors are open or closed and sends this information to the body computer. | |
| Door Lock Assembly | Door Lock Position Switch | Detects whether the door is locked or unlocked and sends this information to the body computer. |
| Door Lock Motor | Drives the motor in response to signals from the body computer and locks or unlocks the doors. | |
| Key-linked Switch | Sends a lock or unlock request signal to the body computer by the key. | |
| Back Door Lock Assembly*1 | Courtesy Light Switch | Detects whether the back door is open or closed and sends this information to the body computer. |
| Door Lock Motor | Drives the motor in response to signals from the body computer and releases the back door latch. | |
| Power Window Regulator Master Switch Assembly | Door Lock Switch | Sends manual lock and unlock request signals to the body computer. |
| Unlock Warning Switch Assembly*2 | Detects whether or not the ignition key is inserted into the ignition key cylinder and sends this information to the body computer. | |
| Body Computer | Drives all door lock motors in response to signals. | |
| Airbag ECU Assembly*3 | Sends an airbag deployment signal to the body computer. | |
| Door Control Battery*3 | A door control battery is provided, which supplies power to the door lock control system when the battery is damaged due to a collision. | |
| Certification ECU (Smart Key ECU Assembly)*4 | Sends the back door opener switch signals to the body computer. | |
| Back Door Opener Switch Assembly*1 | Sends back door opener switch signals to the body computer.*2 | |
| Sends back door opener switch signals to the certification ECU (smart Key ECU Assembly).*4 | ||
FUNCTION
The power door lock control system has the following functions:
| Function | Outline |
|---|---|
|
*1: Models without smart entry and start system *2: Models with smart entry and start system *3: Models with collision door lock release function |
|
| Manual Lock and Unlock | This function can lock or unlock all doors by operation of the door lock switch. |
| Manual Unlock Prohibition | Performing the door lock operation with a door control transmitter assembly *1 or an electrical key transmitter sub-assembly *2 will prohibit the doors from being unlocked by the door lock control switch. |
| Key-linked Lock and Unlock | This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected. |
| Key Confinement Prevention | When the key is inserted in the ignition key cylinder*1 and the door lock operation is performed while the driver door is open, all the doors will be unlocked. |
| Speed Sensitive Automatic Door Lock*3 | After the ignition switch has been turned ON with any of the doors unlocked, this function causes all doors to be automatically locked once the vehicle speed reaches approximately 20 km/h (13 mph) or more. After this function has operated, it will not operate again until either of the following conditions is met:
·
Any of the doors are opened after the vehicle has stopped. ·
The ignition switch is turned off after the vehicle has stopped. |
| Collision Door Lock Release*3 | If the SRS airbag system has been deployed and the body computer has detected the signal that is output by the airbag sensor assembly, the body computer unlocks all the doors. |