CONSTRUCTION
Power Source Display (Models with color type multi-information display)
When the certification ECU (smart key ECU assembly) detects an abnormality with the smart entry and start system, a message appears on the multi-information display. If the engine is stopped in this state, it might not be possible to restart it.
| *1 | Multi-information Display | - | - |
| *a | Power Source State (ACC) | *b | Power Source State (IG) |
| *c | Key Warning Light | - | - |
|
*: The shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on). |
|
| Displayed Item | Power Source Condition |
| - | Either of the following conditions is met:
·
The engine has started. ·
The power source is turned off. |
| Power Source State (ACC) | On (ACC) state |
| Power Source State (IG) | On (IG) state (the engine is not started.) |
| Key Warning Light | Engine start ready state* |
Power Source Display (Models with monochrome type multi-information display)
When the certification ECU (smart key ECU assembly) detects an abnormality with the smart entry and start system, it makes the smart warning light blink in yellow. If the engine is stopped in this state, it might not be possible to restart it.
| *a | Smart Warning Light | - | - |
|
*: The engine is not started. |
||
| Smart Warning Light | Condition | |
| Turn Off | Either of the following conditions is met:
·
The engine has started. ·
The power source is turned off. |
|
| Green | Illuminate | Engine start ready state |
| Blinking (Slow) | On (ACC) state or On (IG) state* | |
| Blinking (Fast) | Steering lock is not unlocked. | |
| Yellow | Blinking | Smart entry and start system is malfunctioning. |
Engine start ready state is shown below.
For models with CVT, the shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).
For models with manual transaxle, the key certification result is OK and the clutch pedal is depressed (the clutch start switch assembly is on).