Home › General › INTRODUCTION › FEATURES › 2017.10–2018.01
NM30M0E _V1 General _018274 INTRODUCTION _0090342 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

1NR-FE Engine

i.

The 1NR-FE engine is a 1.3-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.


ii.

This engine uses the Direct Ignition System (DIS), dual Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.

Item Specification
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with Dual VVT-i)
Fuel System SFI
Displacement 1329 cm3 (81.1 cu. in.)
Max. Output [EEC] 73 kW @ 6000 rpm
Max. Torque [EEC] 123 N*m @ 4200 rpm



b.

2NR-FE Engine

i.

The 2NR-FE engine is a 1.5-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.


ii.

This engine uses the Direct Ignition System (DIS), dual Variable Valve Timing-intelligent (VVT-i) system and Electronic Throttle Control System-intelligent (ETCS-i). These systems achieve improved engine performance, quietness, fuel economy and clean emission.

Item Specification
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with Dual VVT-i)
Fuel System SFI
Displacement 1496 cm3 (91.3 cu. in.)
Max. Output [EEC] 79 kW @ 6000 rpm
Max. Torque [EEC] 140 N*m @ 4200 rpm



c.

C50, C54 Manual Transaxles

i.

A C50 5-speed manual transaxle is used on the models with 2NR-FE engine.


ii.

A C54 5-speed manual transaxle is used on the models with 1NR-FE engine.

Item Specification
Transaxle Type C50 C54
Gear Ratio 1st 3.545 3.545
2nd 1.904 1.904
3rd 1.310 1.310
4th 0.969 1.031
5th 0.815 0.864
Reverse 3.250 3.250
Differential Gear Ratio 4.058 3.941



d.

K411 and K312 Continuously Variable Transaxles (CVT)

i.

A K411 Continuously Variable Transaxle (CVT) is used with the 1NR-FE engine.


ii.

A K312 Continuously Variable Transaxle (CVT) is used with the 2NR-FE engine.


iii.

The K411 and K312 CVTs, including the pair of pulleys and the steel belt in the shift mechanism, are transaxles which steplessly shift from start-up to the maximum speed offering a smooth shift feeling and excellent fuel economy.

Item Specification
Transaxle Type K411 K312
Pulley Ratio Forward 2.386 to 0.426 2.480 to 0.396
Reverse 2.505 to 1.736 2.604 to 1.680
Differential Gear Ratio* 5.403 4.761

HINT:

*: Reduction gear ratio included.




e.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A torsion-beam type suspension is used for the rear.



f.

Steering

i.

An Electric Power Steering (EPS) system is used.


ii.

A manual tilt mechanism is used.



g.

Brake

Item Specification
Front Brake Type Ventilated Disc
Rotor Size (D x T)*1 255 mm x 22 mm (10.04 in. x 0.87 in.)*2
275 mm x 22 mm (10.83 in. x 0.87 in.)*3
Rear Brake (for Disc) Type Solid Disc
Rotor Size (D x T)*1 259 mm x 9 mm (10.20 in. x 0.35 in.)
Rear Brake (for Drum) Type Leading-trailing Drum
Drum Inner Diameter 200 mm (7.87 in.)
Brake Control System
·

ABS with EBD

·

ABS with EBD, Brake Assist, TRC and VSC

·

ABS with EBD, Brake Assist, TRC, VSC and Hill-start Assist Control



HINT:

*1: Diameter x Thickness

*2: Models with rear drum brake

*3: Models with rear disc brake