CONSTRUCTION
The front and rear spats block air flowing toward the tires, reducing air that flows into the wheel houses. Reducing the air will minimize interference with airflow generated by tire revolution. By minimizing air turbulence that occurs around the tires, the excellent maneuvering stability has been provided.
| *A | For Sedan Models | *B | For Hatchback Models |
| *1 | Engine Under Cover | *2 | Front Spat LH (Front Wheel Opening Extension Pad LH) |
| *3 | Front Spat RH (Front Wheel Opening Extension Pad RH) | *4 | Rear Spat LH (Rear Wheel Opening Extension Pad LH) |
| *5 | Rear Spat RH (Rear Wheel Opening Extension Pad RH) | - | - |
The deflector is installed onto the radiator support to direct driving airflow into the radiator, thus leading to the excellent ventilation performance of the vehicle front section.
| *1 | Radiator Side Air Seal RH | *2 | Radiator Side Air Seal LH |
| *3 | Radiator Support Extension RH | *4 | Radiator Support Extension LH |
| *a | The illustrations shown are examples only. | - | - |
The rear bumper seals have been provided with aerodynamic shapes (fins) to adjust the airflow inside the wheel housing, contributing to enhanced steering performance.
| *1 | Rear Bumper Side Seal | *2 | Tire |
| *a | Fin | - | - |
|
Airflow | - | - |
A rear spoiler has been provided at the roof end to prevent air, which flows from the roof, from entering the area behind the vehicle, reducing wind drag and resulting in excellent fuel efficiency. As for the style of the rear spoiler, it is shaped so that the body line can seamlessly extend from the roof panel.
| *1 | Rear Spoiler | - | - |
| *a | A-A Cross Section | - | - |