FUNCTION OF MAIN COMPONENTS
The main components in the SRS airbag system have the following functions:
| Components | Outline | |
|---|---|---|
|
*1: Models with SRS side airbag *2: Models with collision door lock release function *3: Models with color type multi-information display |
||
| Airbag ECU Assembly | ·
In the event of a frontal collision, the airbag ECU assembly receives signals from the front airbag sensor. The airbag ECU assembly receives the signal via its judgment circuit and also receives another signal from the safing sensor built into the airbag ECU assembly. After receiving a signal from at least one of the front airbag sensor and the safing sensor, the airbag ECU assembly determines whether the SRS driver airbag, SRS front passenger airbag, SRS driver knee airbag*1 and SRS curtain shield airbags*1 should be deployed and front seat belt pretensioners should be activated. ·
In the event of a side or rear side collision, the airbag ECU assembly receives signals from the side airbag sensor assembly or No. 2 side airbag sensor assembly. The airbag ECU assembly receives the signal via its judgment circuit and also receives another signal from the safing sensor built into the airbag ECU assembly. After receiving a signal from at least one of the side sensors and the safing sensor, the airbag ECU assembly determines whether the SRS side airbags and SRS curtain shield airbags should be deployed.*1 ·
Sends a SRS airbag deployment signal to the ECM and body computer*2. |
|
| SRS Driver Airbag (Horn Button Assembly) | Used as supplements to the seat belts to help reduce impact to the occupants. | |
| SRS Front Passenger Airbag (Instrument Panel Passenger Airbag without Door Assembly) | ||
| SRS Driver Knee Airbag (Lower No. 1 Instrument Panel Airbag Assembly)*1 | ||
| SRS Side Airbag LH/RH (Front Seat Airbag Assembly LH/RH)*1 | ||
| SRS Curtain Shield Airbag LH/RH (Curtain Shield Airbag Assembly LH/RH)*1 | ||
| Front Airbag Sensor | Based on the deceleration of the vehicle during a frontal collision, distortion is created in the sensor and is converted into an electrical signal. | |
| Side Airbag Sensor Assembly LH/RH*1 | Based on the deceleration of the vehicle during a side or rear side collision, distortion is created in the sensor and is converted into an electrical signal. | |
| No. 2 Side Airbag Sensor Assembly LH/RH*1 | ||
| Front Seat Outer Belt Assembly LH/RH | Used to help reduce impact to the occupants. | |
| Combination Meter Assembly | SRS Warning Light | Turns on to alert the driver when the airbag ECU assembly detects a malfunction in the system. |
| Master Warning Light*3 | Turns on to alert the driver when the airbag ECU assembly detects a malfunction in the system. | |
| Multi-information Display*3 | Displays the warning message to inform the driver of a malfunction in the system. | |
| Buzzer*3 | Sounds to warn the driver of a malfunction in the system. | |
| ECM | Stops the fuel pump when the SRS airbag deployment signal is received. | |
| Body Computer*2 | Receives a SRS airbag deployment signal from the airbag ECU assembly and operates the collision door lock release function. | |
SYSTEM CONTROL
SRS Airbag for Frontal Collision
There are 2*1 or 5*2 airbags which deploy in the event of a frontal collision: SRS driver airbag, SRS front passenger airbag, SRS driver knee airbag*2 and SRS curtain shield airbags*2. These SRS airbags deploy simultaneously. In addition, the front pretensioners contained in the front seat outer belt assemblies are also activated.
*1: Models without SRS side airbag
*2: Models with SRS side airbag
For a frontal collision, if a front airbag sensor detects an impact, it informs the airbag ECU assembly. The airbag ECU assembly causes the SRS driver airbag, SRS front passenger airbag, SRS driver knee airbag* and SRS curtain shield airbags* to deploy. Meanwhile, the airbag ECU assembly activates the front seat belt pretensioners.
*: Models with SRS side airbag
Deceleration sensors used for the SRS airbag system are installed on various parts on the vehicle and calculate the deceleration (or acceleration) rate of each part during a collision.
Depending on the situation, the airbag ECU assembly sends a deployment signal to each SRS airbag based on the information from each sensor.
Frontal collision signals are produced based on the information from the airbag ECU assembly and front airbag sensor. Frontal collision signals are used to deploy the SRS airbags and activate the pretensioners as indicated in the table below.
SRS Airbag for Side/Rear Side Collision (Models with SRS Side Airbag)
There are 2 airbags which deploy in the event of a severe side collision: the SRS side airbag and SRS curtain shield airbag. These airbags deploy simultaneously.
For a side collision, if the side airbag sensor assembly detects an impact, it informs the airbag ECU assembly, and the airbag ECU assembly causes the SRS side airbag and SRS curtain shield airbag to deploy simultaneously.
The SRS side airbag and SRS curtain shield airbag are deployed based on signals from the side airbag sensor assemblies and airbag ECU assembly.
For a rear side collision, if the No. 2 side airbag sensor assembly detects an impact, it informs the airbag ECU assembly and the airbag ECU assembly causes the SRS curtain shield airbag to deploy.
The SRS curtain shield airbag is deployed based on signals from the No. 2 side airbag sensor assemblies and airbag ECU assembly.
Primary Check Illumination Control
After the ignition switch is turned ON, the airbag ECU assembly illuminates the SRS warning light in the combination meter assembly for approximately 6 seconds and conducts the primary check. During the primary check, the ignition of SRS airbags is prohibited and a diagnosis of the airbag ECU assembly is performed. If trouble is detected during the primary check, the SRS warning light remains on even after the 6 seconds have elapsed. See the illustration below.
DIAGNOSIS
If the airbag ECU assembly detects a malfunction in the SRS airbag system, the airbag ECU assembly stores the malfunction data in memory in addition to illuminating the SRS warning light.
The airbag ECU assembly outputs malfunction data and Diagnostic Trouble Codes (DTCs) to the Global TechStream (GTS).
The DTCs can be read after connecting the Global TechStream (GTS) to the DLC3. For details, refer to the Repair Manual.
If the SRS airbags deploy, the airbag ECU assembly will turn on the SRS warning light. However, unlike the ordinary diagnosis function, a DTC will not be stored. The SRS warning light cannot be manually turned off. It is necessary to replace the airbag ECU assembly with a new one.