Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2018.01
NM30M0E _58 Vehicle Interior _018278 HEATING / AIR CONDITIONING _0090351 AIR CONDITIONING SYSTEM GE GENERAL F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A manual air conditioning system or automatic air conditioning system is used.



SPECIFICATION


a.

Performance

Item Specification
Heater Heater Output W 4400
Air Flow Volume m3/h 280
Power Consumption W 190
Cooler Cooling Capacity W 4280*1
4770*2
Air Flow Volume m3/h 450
Power Consumption W 220

HINT:

*1: Except models for G.C.C. countries

*2: Models for G.C.C. countries



b.

Ventilation and Heater Radiator Unit Sub-assembly

Item Specification
Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II
Size (W x H x L) mm (in.) 232.7 x 130 x 21 (9.16 x 5.12 x 0.827)
Fin Pitch mm (in.) 1.8 (0.0709)
Blower Motor with Fan Sub-assembly Motor Type K62-10T
Fan Type Shroud Sirocco
Fan Size (Dia. x H) mm (in.) 110 x 74 (4.33 x 2.91)


c.

Air Conditioning

Item Specification
Cooler Condenser Assembly Type Global Inner-fin Condenser (GIC)
Size (W x H x L) mm (in.) 520 x 318.6 x 11.5 (20.5 x 12.5 x 0.452)*1
600 x 318.6 x 11.5 (23.6 x 12.5 x 0.452)*2
Fin Pitch mm (in.) 2.5 (0.0984)
No. 1 Cooler Evaporator Sub-assembly Type Beneficial Refrigerant Stream (BRS)
Size (W x H x L) mm (in.) 185.9 x 251 x 38 (7.32 x 9.88 x 1.50)
Fin Pitch mm (in.) 3.4 (0.133)*1
2.6 (0.102)*2
Cooler Compressor Assembly Type 10SRE11C
Pulley Magnetic Clutch
Refrigerant Type HFC 134a
Charge Volume g 370 +/- 50*1
400 +/- 50*2
Clean Air Filter Semi Standard Type

HINT:

*1: Except models for G.C.C. countries

*2: Models for G.C.C. countries




MAIN FEATURES


a.

The air conditioning system has the following features:

High Performance
·

Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.*

·

The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.*


Lightweight A bus connector (air conditioning harness assembly) with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.*
Compact
·

A semi-center location air conditioning unit in which the cooler evaporator sub-assembly and heater radiator unit sub-assembly are placed in the vehicle's longitudinal direction is used.

·

A blower motor with a built-in blower motor controller is used in a compact construction.


Others The following parts are used to ensure high cooling performance while realizing a compact and lightweight construction.
·

Semi-center location air conditioning unit

·

Beneficial Refrigerant Stream (BRS) evaporator

·

Global Inner-fin Condenser (GIC)



HINT:

*: Models with automatic air conditioning system