Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM
RM30M0E _58 Vehicle Interior _017115 SUPPLEMENTAL RESTRAINT SYSTEMS _0084736 AIRBAG SYSTEM D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  CHECK MODE PROCEDURE  


CHECK MODE (SIGNAL CHECK): DTC CHECK


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / SRS Airbag / Utility / Check Mode, and proceed with checking using the GTS.

NOTICE:

Select Signal Check screen on the GTS to clear the output DTCs (both present and history).


HINT:
·

DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

·

Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.