The airbag ECU assembly consists of a deceleration sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the airbag ECU assembly receives signals from the deceleration sensor, it determines whether the airbag squib and pretensioner squib should be activated.
DTC B1000/31 is stored when a malfunction is detected in the airbag ECU assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Test Mode / Check Mode |
|---|---|---|---|---|
| B1000/31 | Center Airbag Sensor Assembly Malfunction | Airbag ECU assembly malfunction | Airbag ECU assembly | DTC does not correspond to check mode. |
Check for DTCs.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
| Result | Proceed to |
|---|---|
| DTC B1000/31 is output. | A |
| DTC B1000/31 and other DTCs are output. | B |
If only DTC B1000/31 is output, do not clear the DTCs, replace the airbag ECU assembly.
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
A
B