Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM30M0E _57 Power Source / Network _017152 NETWORKING _0084783 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.

HINT:
·

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Certification Bus Lines (w/ Smart Entry and Start System)
Component Master Control LIN Communication DTC Output Function
Certification ECU (Smart Key ECU Assembly) ○ ○
Steering Lock ECU (Steering Lock Actuator Assembly) - -