OVERALL CAN BUS DIAGRAM
The CAN communication system is composed of 1 bus.
| *A | for LHD | - | - |
| 1 | Combination Meter Assembly | 2 | Certification ECU (Smart Key ECU Assembly) (w/ Smart Entry and Start System) |
| 3 | Airbag ECU Assembly (w/ Airbag System) | 4 | Brake Actuator Assembly (w/ ABS) |
| 5 | Air Conditioning Amplifier Assembly (for Automatic Air Conditioning System) | 6 | DLC3 |
| 7 | ECM | - | - |
| *A | for RHD | - | - |
| 1 | Combination Meter Assembly | 2 | Airbag ECU Assembly |
| 3 | Brake Actuator Assembly | 4 | DLC3 |
| 5 | Certification ECU (Smart Key ECU Assembly)
(w/ Smart Entry and Start System) |
6 | ECM |
Refer to the following bus wiring diagrams for details.
V BUS (for LHD)
The CAN communication system connects to other networks via ECUs that function as a gateway.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>SYSTEM DIAGRAM
V BUS (for RHD)
The CAN communication system connects to other networks via ECUs that function as a gateway.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>SYSTEM DIAGRAM