POWER WINDOW CONTROL SYSTEM DESCRIPTION
The power window control system controls the power window UP/DOWN function using the power window regulator motor assembly. The main controls of this system are the power window regulator master switch assembly, which is built into the driver door, and the power window regulator switches, which are built into the front passenger door and rear doors.
Pressing the power window regulator switch assembly or either of the power window switches on the power window regulator master switch assembly transmits an UP/DOWN signal to the corresponding power window regulator motor assembly.
An ECU is built into the front power window regulator motor assembly (driver side).
FUNCTION OF MAIN COMPONENTS
The power window control system consists of the following components.
| Component | Outline |
|---|---|
| Power window regulator master switch assembly | ·
Controls window operations for all windows. ·
When window lock switch is set to lock position, window operation will only be possible with power window regulator master switch assembly. |
| Power window regulator switch assembly | ·
Located on front passenger side door and rear doors. ·
Each power window regulator switch controls window operations for its respective window. |
| Front power window regulator motor assembly (driver side) | Uses Hall IC in regulator motor with ECU to detect window position and jamming. |
| Power window regulator motor assembly (except driver side) | Receives power window switch signals and activates motor to change window position. |
SYSTEM FUNCTION
The power window control system has the following functions.
| Function | Outline |
|---|---|
| Manual up/down function | Function that raises the window while the power window regulator switch is pulled halfway (driver side) or full (except driver side) up and lowers the window while it is pushed halfway (driver side) or full (except driver side) down. The window stops when the switch is released. |
| Auto up/down function*1 | Function that enables the driver door window to be fully opened or closed by one full push or pull of the power window regulator master switch. |
| Jam protection function*1 | ·
Function that automatically stops a power window and moves it downward if an object is jammed in the power window. ·
Jam protection function works for AUTO UP and MANUAL UP operation of the driver door power window. |
| Remote control function | Function that allows power window regulator master switch assembly to control MANUAL UP/DOWN operation of front passenger side power window and rear power windows. |
| Window lock function | ·
Function where the front passenger and rear power window regulator switches operation is disabled when the window lock switch is pressed. ·
The front passenger and rear power window regulator switches can be operated when the window lock switch is pressed again. |
| Fail-safe*1 | If the pulse sensor(s) (Hall IC(s)) in the front power window regulator motor assembly malfunctions, the power window AUTO UP/DOWN function is disabled. |
*1: for Driver Side